To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 247.28672 and is the answer not in the manual?
General| Brand | Craftsman |
|---|---|
| Model | 247.28672 |
| Category | Lawn Mower |
| Type | Push Mower |
| Power Source | Gasoline |
| Engine Type | 4-Cycle |
| Cutting Width | 21 inches |
| Cutting Height | 1.25 - 3.75 inches |
| Cutting Height Positions | 6 |
| Deck Material | Steel |
| Weight | 60 lbs |
| Mulching Capability | Yes |
| Bagging Capability | Yes |
| Side Discharge Capability | Yes |
| Starter Type | Recoil |
| Oil Type | SAE 30 |
| Oil Capacity | 20 oz |
| Wheel Size | 7 inches (front), 8 inches (rear) |
Read, understand, and follow all instructions before assembly and operation.
Guidelines for safe operation on slopes, including precautions and maneuvers.
Safety precautions regarding children's interaction with the mower.
Instructions and safety guidelines for towing equipment with the tractor.
Safe handling of gasoline and general service precautions.
Procedures for general maintenance and safety checks.
Explanation of safety symbols and their meanings.
A visual guide to determine safe slope operation limits for the tractor.
Instructions for initial tractor setup, including manual movement.
Steps to safely remove shipping braces before operating the tractor.
Procedure for correctly connecting the tractor's battery cables.
Adjusting deck gauge wheels for proper cutting height and clearance.
Importance of checking and maintaining correct tire pressure.
How to adjust the operator's seat for comfort and safety.
Guidance on fueling and checking engine oil levels before operation.
Description of the brake pedal's function and operation.
Information on adjusting the seat position for operator comfort.
How to use the deck lift lever to adjust cutting deck height.
Operation of the ignition switch for starting and stopping the engine.
Understanding the dashboard indicators and hour meter.
How to operate the drive pedal for forward and reverse movement.
Locating and understanding the fuel level indicator.
How to engage and disengage the PTO for blade operation.
Operation of the parking brake and cruise control functions.
Explanation of safety interlock systems for operator protection.
Step-by-step guide to starting the tractor's engine safely.
Procedures for safely stopping the tractor's engine.
Instructions for operating the tractor controls for movement.
How to use reverse caution mode with blades engaged, with safety warnings.
Safe practices for operating the tractor on inclines and slopes.
How to engage the parking brake and set cruise control.
Best practices and safety for mowing operations.
A chart detailing service intervals and tasks for the tractor.
Step-by-step instructions for removing the cutting deck from the tractor.
Procedure for replacing the V-belt on the cutting deck.
Instructions for removing, sharpening, or replacing cutting blades.
Guidelines for safely jump-starting the tractor's battery.
Instructions for charging the tractor's battery.
How to check and maintain the engine oil level.
Step-by-step guide for draining and refilling engine oil.
Maintenance and cleaning procedures for the air cleaner.
Instructions for inspecting and replacing the spark plug.
Procedures for draining and replacing the fuel filter.
Lubrication points and schedule for various tractor components.
Procedures for adjusting deck leveling and other components.
Steps to prepare the engine for storage, including fuel system.
Cleaning and preparing the tractor itself for off-season storage.
Common causes and remedies for engine starting issues.
Troubleshooting steps for an engine running unevenly.
Diagnosing and resolving engine overheating problems.
Solutions for engine hesitation during high RPM operation.
Addressing issues with the engine's idling performance.
Identifying causes and solutions for excessive machine vibration.
Troubleshooting why the mower is not mulching grass effectively.
Diagnosing and fixing issues causing an uneven grass cut.
Information about the benefits and coverage of the repair protection agreement.
List of parts for the steering and axle assembly.
Parts list for the hood, dash, and related components.
Parts list for the seat, fenders, and mounting hardware.
Parts list for the drive system, wheels, and related components.
Detailed parts breakdown for the engine assembly.
Parts list for the cutting deck and its components.
Identification and explanation of various safety labels on the equipment.
Owner's rights and responsibilities regarding emission control warranty.
List of specific emission-related parts covered by the warranty.
