Craftsman 247.29932 User Manual (English)

Questions and Answers:

S
Sean OwensJul 30, 2025
Why does my Craftsman 247.29932 engine fail to start?
- M
  Michelle RamosJul 30, 2025
  If your Craftsman Tiller engine won't start, there are several potential causes. First, ensure the spark plug wire is securely connected. Next, check that the Engine Throttle Control Lever is in the START position. Also, the fuel tank may be empty or contain stale fuel, so fill it with clean, fresh gasoline. A dirty air filter can also prevent starting, so clean or replace it. Finally, the spark plug itself might be defective or incorrectly gapped; clean, adjust the gap, or replace it as needed.
A
Alex ScottAug 4, 2025
Why is my Craftsman Tiller engine running erratically?
- R
  Ronald DixonAug 4, 2025
  If your Craftsman Tiller engine is running erratically, consider these potential causes. A defective or incorrectly gapped spark plug can cause erratic performance, so clean, adjust the gap, or replace it. Dirty air filter(s) can also be the culprit; clean or replace them. Stale gasoline can also lead to this issue, so replace it with fresh gasoline. Lastly, ensure the engine cooling system isn't clogged by cleaning it.
K
kenneth95Aug 9, 2025
What to do if my Craftsman 247.29932 engine overheats?
- A
  Aaron CoxAug 9, 2025
  If your Craftsman Tiller engine is overheating, start by checking the engine cooling system for clogs and clean the air cooling area. Also, check the oil level and replenish if low.
E
ethomasAug 14, 2025
What to do if Craftsman 247.29932 Tiller wheels/tines will not turn?
- N
  Nichole FoleyAug 14, 2025
  If the wheels or tines on your Craftsman Tiller aren't turning, first ensure you're using the controls correctly. Next, check the drive belts for wear, breakage, or misadjustment; replace or adjust them as necessary. Finally, check the transmission pulley for looseness and tighten the bolt if needed.
L
Laura ConleyAug 25, 2025
What to do if wheels turn, but tines don’t on my Craftsman 247.29932 Tiller?
- J
  John BartlettAug 25, 2025
  If the wheels on your Craftsman Tiller are turning but the tines aren’t, first check for missing tine holder mounting hardware and replace it. Also, check the transmission pulley for a loose bolt and tighten it.
A
amandasanchezSep 10, 2025
Why do the tines turn, but wheels don’t on my Craftsman 247.29932?
- J
  Jenna KiddSep 12, 2025
  If the tines on your Craftsman Tiller are turning but the wheels aren’t, check the transmission pulley for a loose bolt and tighten it.