To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 315.116211 and is the answer not in the manual?
Explains the safety feature of double insulation and its implications for tool design.
Provides guidance on tool maintenance and repair, emphasizing qualified technicians.
Lists key safety actions for operating power tools, including workspace and tool handling.
Details requirements for apparel, eye protection, and respiratory/hearing protection.
Covers cord handling, securing work, tool maintenance, and accidental starting prevention.
Provides recommendations for extension cord condition, type, and usage.
Warns against wet sanding, explosive atmospheres, and improper tool handling.
Instructs to check damaged parts and ensure the tool switch functions correctly.
Explains polarized plugs and warns about chemical hazards from dust.
Advises users to save and frequently refer to the owner's manual.
Lists technical details such as backing pad size, speed, rating, and input.
Details available sanding discs (fine, medium, coarse) for the tool.
Encourages familiarization with operating features and safety requirements.
Explains how to turn the sander ON and OFF using the simple switch control.
Describes the overlapping sanding movements for fast cutting and good results.
Specifies connection to a 120V, 60Hz AC power supply and warns against DC.
Lists approved applications and guides on selecting the correct grit and type of disc.
Provides step-by-step instructions for attaching adhesive-backed sanding discs.
Advises on removing the disc soon after use to prevent difficult bonding.
Explains the dust bag assembly for collecting sanding dust during operation.
Details how to connect the sander's dust collection to a vacuum for extended use.
Covers securing work, placing the sander, and sanding techniques.
Advises on applying appropriate pressure, avoiding forcing, and not sanding one spot too long.
Describes actions for motor overheating and how to perform flush sanding.
Explains how to periodically check the sander's brake operation for proper stopping.
States that bearings are pre-lubricated for the life of the unit and require no further lubrication.
Provides instructions for emptying and cleaning the dust bag for efficient operation.
Advises on using qualified technicians for service and avoiding certain solvents for cleaning.
Details power loss with extension cords and emphasizes checking them for damage.
Illustrates the sander components with numbered parts for identification.
Shows the optional conversion pad for use with different sanding disc types.
Lists specific part numbers, descriptions, and quantities for sander components.
Notes that service on the double insulated system should be by qualified technicians.
General