To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 315.117120 and is the answer not in the manual?
Explains the concept of double insulation in electric power tools and its safety benefits.
Details that servicing requires qualified technicians and use of original factory parts.
Familiarize yourself with all operating features and safety requirements before use.
Details the sander's switch mechanism, including the convenient 'lock-on' feature.
Instructions on using the front and rear handles for control and proper grip.
Step-by-step guide on releasing tension, installing, and removing the sanding belt.
How to adjust the tracking screw to ensure the belt runs correctly on the pulleys.
Guidance on clamping work, applying pressure, and maintaining a firm grip during operation.
Information on selecting and using appropriate extension cords for safe and effective operation.
Advice on cleaning plastic parts, avoiding solvents, and care for materials subject to wear.
States that the tool's bearings are pre-lubricated for life, requiring no further lubrication.
Details power supply requirements (120V, 60Hz AC) and voltage drop considerations.
Details the importance of the Double Insulated System and recommends qualified service.
Explains the concept of double insulation in electric power tools and its safety benefits.
Details that servicing requires qualified technicians and use of original factory parts.
Familiarize yourself with all operating features and safety requirements before use.
Details the sander's switch mechanism, including the convenient 'lock-on' feature.
Instructions on using the front and rear handles for control and proper grip.
Step-by-step guide on releasing tension, installing, and removing the sanding belt.
How to adjust the tracking screw to ensure the belt runs correctly on the pulleys.
Guidance on clamping work, applying pressure, and maintaining a firm grip during operation.
Information on selecting and using appropriate extension cords for safe and effective operation.
Advice on cleaning plastic parts, avoiding solvents, and care for materials subject to wear.
States that the tool's bearings are pre-lubricated for life, requiring no further lubrication.
Details power supply requirements (120V, 60Hz AC) and voltage drop considerations.
Details the importance of the Double Insulated System and recommends qualified service.
General