To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 315.116400 and is the answer not in the manual?
Guidelines for maintaining a clean and safe work environment, avoiding hazards.
Precautions related to battery charging, connections, and cord handling.
Operator's physical well-being, including alertness, attire, and avoiding accidental starts.
Proper operation, maintenance, securing workpieces, and tool handling.
Guidelines for tool servicing and repair by qualified personnel using identical parts.
Crucial safety instructions for the battery charger and its operation.
Technical details and specifications of the cordless drill-driver.
Explains direction selector, torque adjustment, and variable speed trigger for operation.
Details the keyless chuck for bit holding and the integrated level indicator.
Covers charger features and integrated bit storage.
Instructions for charging cool battery packs and understanding charger LEDs.
Steps for charging the battery pack for the first time.
Instructions for charging a battery pack that has become hot.
Steps for inserting and removing the battery pack from the drill.
How to turn the drill ON/OFF using the variable speed switch trigger.
Explanation of variable speed trigger and direction selector.
How to tighten or release drill bits using the keyless chuck.
How to adjust the torque clutch settings for different materials and screws.
Location and use of the integrated storage for drill bits.
Steps for correctly inserting and tightening drill bits into the chuck.
Steps for safely loosening and removing drill bits from the chuck.
Guidance on securing material, applying pressure, and handling bit breakthrough.
Tips for drilling in wood, including speed selection and preventing splintering.
Best practices for drilling metals, including speed, lubrication, and large holes.
Instructions for cleaning plastic parts and general tool upkeep.
Tips for maximizing battery life and proper storage conditions.
Information on recycling nickel-cadmium batteries and disposal laws.
Steps for removing the drill chuck using a hex key and mallet.
Instructions for tightening the chuck on the spindle and securing the chuck screw.
Guidelines for maintaining a clean and safe work environment, avoiding hazards.
Precautions related to battery charging, connections, and cord handling.
Operator's physical well-being, including alertness, attire, and avoiding accidental starts.
Proper operation, maintenance, securing workpieces, and tool handling.
Guidelines for tool servicing and repair by qualified personnel using identical parts.
Crucial safety instructions for the battery charger and its operation.
Technical details and specifications of the cordless drill-driver.
Explains direction selector, torque adjustment, and variable speed trigger for operation.
Details the keyless chuck for bit holding and the integrated level indicator.
Covers charger features and integrated bit storage.
Instructions for charging cool battery packs and understanding charger LEDs.
Steps for charging the battery pack for the first time.
Instructions for charging a battery pack that has become hot.
Steps for inserting and removing the battery pack from the drill.
How to turn the drill ON/OFF using the variable speed switch trigger.
Explanation of variable speed trigger and direction selector.
How to tighten or release drill bits using the keyless chuck.
How to adjust the torque clutch settings for different materials and screws.
Location and use of the integrated storage for drill bits.
Steps for correctly inserting and tightening drill bits into the chuck.
Steps for safely loosening and removing drill bits from the chuck.
Guidance on securing material, applying pressure, and handling bit breakthrough.
Tips for drilling in wood, including speed selection and preventing splintering.
Best practices for drilling metals, including speed, lubrication, and large holes.
Instructions for cleaning plastic parts and general tool upkeep.
Tips for maximizing battery life and proper storage conditions.
Information on recycling nickel-cadmium batteries and disposal laws.
Steps for removing the drill chuck using a hex key and mallet.
Instructions for tightening the chuck on the spindle and securing the chuck screw.
General| Voltage | 19.2V |
|---|---|
| Speed Settings | 2 |
| Battery Type | NiCd |
| Variable Speed | Yes |
| Clutch Settings | 24 |
| Chuck Size | 3/8 inch |
