To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 315.269211 and is the answer not in the manual?
General| Voltage | 120V |
|---|---|
| Speed | 25, 000 RPM |
| Collet Size | 1/4 inch |
| Base Type | Fixed |
| Weight | 6.5 lbs |
| Amps | 9.5 Amps |
Guidelines for maintaining a safe and clean work environment.
Precautions related to power supply, cords, and grounding.
Advice on user alertness, attire, and avoiding distractions.
Best practices for operating, maintaining, and securing the tool.
Essential safety practices for operating the router.
Explains the meaning of various safety alert symbols used in the manual.
Details the double insulation safety system and power requirements.
Covers switch, spindle lock, and locking arm functions.
Explains the depth adjusting ring and variable speed control.
Describes the chip shield and vacuum attachment.
Detailed instructions for safely changing router bits.
Instructions for setting the desired cutting depth accurately.
Specific method for setting depth when using a router table.
Guide to speed control and installing vacuum attachment.
General tips and procedures for starting and stopping the router.
Guidance on positioning the router for edge and internal routing.
Explains the importance of proper feed rate for cut quality.
Discusses consequences of incorrect feed rates and how to detect them.
Explains proper cutting direction and how to guard against kickback.
Guidance on routing direction for internal grooves and curves.
Methods for making deep cuts in multiple passes for accuracy.
Instructions for making straight and wider grooves using guides.
Methods for routing patterns, letters, and designs without guides.
How to use guide bushings for accurate template following.
Techniques for shaping edges using bits with pilots.
General guidelines for cleaning and care of the tool.
Advice on cleaning and sharpening router bits and collets.
Covers locking arm tension, lubrication, and extension cord usage.
Information on converting the router into a high-speed shaper using a table.
Explanation of how guide bushings improve accuracy in routing.
