Craftsman 720.25251 User Manual

ii i,_llllll,_i,_l,,ii_llllll,i_,11, :
Save This Manual
For Future Reference
owners
manual
MODEL NO=
720.25251
CAUTION:
READ ALL
INSTRUCTIONS
CAREFULLY
OUTE
° assembly
° operating
Sold by SEARS, ROEBUCK AND CO., CHICAGO, IL 60684 U.S.A.
Printed in U.S.A.

Craftsman 720.25251 Specifications

General

Speed	25000 RPM
Collet Size	1/4 in
Weight	6.5 lbs
Corded/Cordless	Corded
Voltage	120 V
Base Type	Fixed
Motor Type	Induction

Summary

Router Crafter Safety Instructions

Use Safety Goggles and Head Protection

Wear safety goggles, face/dust mask, and ear protectors as needed for eye, respiratory, and hearing safety.

Tool Handling and Maintenance

Avoid forcing the tool, keep hands clear, clean the tool, and maintain it properly.

General Power Tool Safety Guidelines

Know Your Tool and Work Area

Safe Operating Practices

Router Crafter Operations Introduction

Router Crafter Setup Procedures

Rounding Up Square to Round

Rounding Up Operation Steps

Detailed instructions for setting up and performing the square to round turning operation.

Rounding Up & Beads/Coves Operations

Completing Rounding Up

Final steps for rounding cuts, including removing flats and smoothing.

Circular Beads and Coves Guide

Instructions for cutting circular beads and coves using specific bits and stops.

Roping and Spiraling Technique

Preparing for Spiral Cuts

Steps to prepare the machine and work piece for roping or spiraling cuts.

Executing Spiral Cuts

Straight Beads and Flutes Cutting

Setup for Lengthwise Cuts

Performing Lengthwise Cuts

Contour Turning Method

Template Creation and Use

Taper Turning Method

Adjusting Taper Settings

Trouble Shooting Guide