To Next PageTo Next PageWhy my Craftsman 316.794011 engine will not start?
There are several reasons why your Craftsman Blower engine might not start: * The fuel tank could be empty, in which case you should fill it with fresh fuel. * The primer bulb may not have been pressed enough; press it 10 times or until fuel is visible. * The fuel might be old (over 30 days); drain the fuel tank and add fresh fuel. * The spark plug could be fouled; replace it.
What to do if Craftsman 316.794011 Blower engine lacks power or stalls?
If your Craftsman Blower engine lacks power or stalls, it could be due to: * Old fuel (over 30 days): Drain the fuel tank and add fresh fuel. * A dirty air filter: Clean or replace the air filter. * A fouled spark plug: Replace the spark plug.
How to fix a Craftsman 316.794011 Blower when the engine will not accelerate?
If the engine of your Craftsman Blower will not accelerate, consider these potential causes: * Old fuel (over 30 days). Solution: Drain the fuel tank and add fresh fuel. * A dirty air filter. Solution: Clean or replace the air filter.
What to do if Craftsman 316.794011 Blower engine will not idle?
If your Craftsman Blower engine won't idle, it might be caused by: * A dirty air filter: Clean or replace the air filter. * Old fuel (over 30 days): Drain the fuel tank and add fresh fuel. * Incorrect idle speed: Adjust the idle speed.
Note regarding spark arrestor requirements for specific U.S. regions and regulations.
Warning about chemicals in engine exhaust and components known to cause cancer or birth defects.
Covers pre-operation checks, and safety warnings related to gasoline handling and storage.
Instructions for safe operation, including personal protection, environment, and unit handling.
Safety precautions unique to operating a blower, like debris control and air intake.
Covers additional safety advice, including general warnings, storage, and transportation.
Explanation of safety alert symbols, pictographs, and their meanings used in the manual.
Details on unit applications, and the tools required for assembly and maintenance.
Key technical data for the blower, including engine type, displacement, and performance metrics.
Step-by-step guide for assembling the flex tube, upper, and lower blower tubes, and nozzle.
Instructions for securing throttle cables with a zip tie and adjusting the throttle grip for comfort.
Guidance on choosing the correct oil and the procedure for adding oil to the crankcase.
Information on recommended fuels, blended fuels, and warnings against using E85.
Steps for safely fueling the unit, including location, cooling, and avoiding ignition sources.
Detailed instructions for starting the engine using primer and choke, and for stopping the unit.
Guide on how to properly put on, take off, and hold the backpack blower while operating.
Advice for efficient and considerate operation, including noise reduction and debris management.
Procedure for checking the engine oil level to ensure it is within the proper operating range.
Step-by-step instructions for draining and refilling the engine oil for regular maintenance.
Maintenance for the air filter and adjustment of the engine's idle speed for optimal running.
Procedure for checking and adjusting valve rocker arm clearance for proper engine operation.
Guidelines for cleaning the unit's exterior and preparing it for short-term or long-term storage.
Diagrams and lists of replacement parts for the backpack blower with part numbers.
General