Need help?Do you have a question about the Craftsman 320.10861 and is the answer not in the manual?
General| Type | Circular Saw |
|---|---|
| Blade Diameter | 7-1/4 inches |
| Motor | 15 Amp |
| Arbor Size | 5/8 inch |
| Depth of Cut at 45 degrees | 1-3/4 inches |
| Weight | 11.5 lbs |
| Depth of Cut at 90 degrees | 2-3/8 inches |
| No Load Speed | 5000 RPM |
Details on laser safety, warnings, and precautions for Class Illa laser.
Guidelines for maintaining a clean and safe work environment.
Instructions for safe electrical connections and usage.
Rules for personal safety, alertness, and attire.
Guidelines for safe tool operation and maintenance.
Procedures for tool service and maintenance.
Specific safety guidelines for operating circular saws.
Explains kickback and methods to prevent it.
Extra safety guidelines for using the power tool.
Instructions for inspecting the saw after unpacking.
Step-by-step guide for attaching the blade to the saw.
Procedure for safely removing the saw blade.
Overview of the saw's features and design.
Technical details and specifications of the circular saw.
How to use the laser guide for accurate cutting.
Information on saw blades and the blade guard system.
Understanding kickback, prevention, and safe cutting techniques.
How to adjust the blade depth for cutting.
Tips for holding the saw and maintaining control during cuts.
Instructions for cross cuts, rip cuts, bevel cuts, and pocket cuts.
Procedures for adjusting the bevel setting and checking stops.
Guidelines for tool service and repair.
Information on the tool's lubrication requirements.
Recommendations and safety for extension cords.
List of recommended saw blades.
To Next Page