To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 320.17235 and is the answer not in the manual?
General| Model Number | 320.17235 |
|---|---|
| Type | Random Orbit Sander |
| Voltage | 120V |
| No Load Speed | 12, 000 OPM |
| Pad Size | 5 inches |
Indicates danger, warning, or caution. May be used with other symbols.
Failure to obey warning can result in death or serious injury. Follow safety precautions.
Failure to obey warning may result in personal injury or property damage.
Informs user of important information for equipment or property damage prevention.
Warning about eye damage from thrown objects; advises wearing safety goggles.
Guidelines for maintaining a safe and clear workspace to prevent accidents.
Rules for operator's personal well-being, including attire and alertness.
Precautions for using the tool correctly and maintaining its condition.
Essential safety measures related to the tool's electrical power and connections.
Guidelines for selecting and using appropriate extension cords with the tool.
Explains symbols found on the tool label, indicating danger, warning, or caution.
Rules for tool service and repair, emphasizing qualified personnel and parts.
Specific safety guidelines tailored for operating sabre saws.
Warnings about chemicals in dust from power tools and measures to reduce exposure.
Further essential operating safety rules not covered in previous sections.
The area over, under, behind, or in front of the blade relative to the workpiece.
The outward bend of saw blade teeth from the blade's face.
The blade speed of a sabre saw, typically 0-3000 SPM.
A cutting operation made against the grain of the workpiece.
A cut made at an angle other than 90° to the base.
A cutting operation along the length of the workpiece.
Cutting without a fence or guide to keep the workpiece stable.
Blade action with forward thrust for increased cutting speed.
Allows blade to swivel for intricate pattern cutting.
Cutting operation where blade goes completely through the workpiece.
Material removed or slot produced by the blade during cutting.
The item on which cutting operations are performed.
A sticky, sap-based residue from wood products.
A sticky, sap-based substance that has hardened.
Steps for safely removing the saw and its components from the packaging.
Lists the included components of the sabre saw package.
Introduction to the saw's features and basic operation.
Detailed list of the sabre saw's specific capabilities and components.
Technical details and performance ratings of the sabre saw.
Instructions on how to access and use the blade storage compartment.
Step-by-step guide for quickly and easily installing saw blades without tools.
Procedure for safely removing the saw blade.
Description of the LED worklight that illuminates the cutting area.
Explains the indicator light that shows when the saw is powered.
How to operate the power switch and the lock-on button for continuous use.
Guide to using the variable speed dial for optimal cutting performance.
Explanation of the orbital control lever and its three cutting modes.
Instructions for attaching and using the vacuum adapter for dust collection.
Advice for general cutting operations, workpiece handling, and blade control.
Specific procedures and precautions for cutting metal with the sabre saw.
How to use a straightedge for making precise, straight cuts.
Technique for starting cuts anywhere on a workpiece without a pilot hole.
Method for achieving sharp corners during cutting operations.
Instructions for adjusting the base plate to perform bevel cuts.
How to install and use the edge guide for repetitive straight cuts.
Guidelines for professional servicing and repair of the tool.
General cleaning and care instructions for the tool.
Information regarding the tool's lubrication requirements.
Information on recommended accessories and where to purchase them.
