To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 35182 - 18 in. 40 CC 2 Cycle Gas Chain Saw and is the answer not in the manual?
General| Engine Type | 2-Cycle |
|---|---|
| Engine Displacement | 40 CC |
| Bar Length | 18 in. |
| Fuel Mix Ratio | 40:1 |
| Power Source | Gas |
| Chain Pitch | 3/8 in. |
| Chain Gauge | 0.050 in. |
Procedures for keeping the saw in good working condition for optimal performance.
Safety guidelines and instructions for handling fuel safely.
Information on understanding and preventing kickback, a dangerous chain saw reaction.
Specific advice to prevent pinch-kickback incidents during cutting operations.
Techniques to prevent pull-in, a type of kickback caused by bottom chain contact.
Tips for maintaining proper grip and balance to control the chain saw.
Details on the function and operation of the chain brake system.
Importance and procedure for lubricating the guide bar and chain with oil.
Instructions and warnings for safely fueling the gasoline engine with the correct mixture.
Procedure for starting the engine when it is already warm or has recently run.
Troubleshooting steps for starting a flooded engine or when the engine is hard to start.
Methodology for felling large trees, focusing on the notch cut and felling process.
Detailed instructions on how to sharpen the chain cutters using appropriate tools and techniques.
