EasyManua.ls Logo

Craftsman 358.351901 User Manual

Craftsman 358.351901
57 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operator's Manual
I CRRFTSMRN°I
2.6 cu.in./42cc 2-Cycle
GASOLINE CHAIN SAW
Model No.
358.351901 - 18 in. Bar
Safety
Assembly
Operation
Maintenance
Parts List
Espa_ol, p. 28
WARNING:
Read and follow all Safety Rules and Operating
Instructions before first use of this product.
For answers to your questions about this product:
Call 7 am-7 pm, Mon-Sat; Sun, 10 am-7 pm
1-800-235-5878 (Hours listed are Central Time)
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
115350126 Rev. 1 4/1/10 BRW
Question and Answer IconNeed help?

Do you have a question about the Craftsman 358.351901 and is the answer not in the manual?

Craftsman 358.351901 Specifications

General IconGeneral
Guide Bar Length18 inches
Weight10.8 lbs
Oil Tank Capacity6.8 oz
Engine Type2-cycle
Chain Pitch3/8 inch
Chain Gauge0.050 inch
TypeGas-powered

Summary

WARRANTY INFORMATION

CRAFTSMAN FULL WARRANTY

Covers defects in material and workmanship for two years from purchase.

REPAIR PROTECTION AGREEMENTS

Offers expert service, unlimited repairs, and product replacement options.

SAFETY GUIDELINES

PRE-OPERATION SAFETY PRECAUTIONS

Plan ahead, wear protective gear, secure clothing, and maintain a safe work area.

SAFE OPERATION PRACTICES

Use two hands, operate in ventilated areas, stop engine before setting down.

FUEL HANDLING AND KICKBACK PREVENTION

Handle fuel safely and understand kickback causes and prevention methods.

CONTROL AND SAFETY FEATURES

Maintain control with proper grip, stance, and utilize safety features like the chain brake.

OPERATION AND USE

KNOW YOUR CHAIN SAW

Familiarize with controls, including ON/STOP switch, throttle, and choke.

STARTING AND FUELING PROCEDURES

Proper fueling, starting cold/warm engines, and handling difficult starts.

OPERATING TIPS AND TECHNIQUES

Guidance on cutting techniques, limbing, pruning, and felling trees.

BUCKING AND LIMBING PROCEDURES

Techniques for cutting fallen trees and removing branches safely.

MAINTENANCE AND SERVICE

CUSTOMER RESPONSIBILITIES

Regular checks and maintenance tasks to ensure proper operation and warranty.

ROUTINE CHECKS AND CLEANING

Inspecting parts, chain tension, guide bar, and cleaning the unit.

ENGINE AND CHAIN CARE

Maintaining cooling system, air filter, muffler, spark plug, and fuel filter.

CHAIN SHARPENING AND REPLACEMENT

Proper techniques for sharpening and replacing the chain and guide bar.

CARBURETOR ADJUSTMENT

Adjusting idle speed and other settings for optimal engine performance.

STORAGE AND TROUBLESHOOTING

PROPER STORAGE PROCEDURES

Steps for storing the saw, including fuel system preparation.

TROUBLESHOOTING GUIDE

Table listing common problems, their causes, and recommended remedies.

EMISSION CONTROL WARRANTY

WARRANTY RIGHTS AND OBLIGATIONS

Details owner's responsibilities and Sears' obligations for emission control systems.

COVERED PARTS AND SERVICES

Information on covered parts, maintenance, and filing claims.

Related product manuals