To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 358.351062 and is the answer not in the manual?
Describes precautions and necessary protective gear before operating.
Highlights built-in safety features designed to reduce kickback hazards.
Lists all items included in the product packaging.
Confirms the saw is fully assembled and requires no additional assembly.
Provides essential guidelines for safe operation of the chain saw.
Details safety measures for handling gasoline and fuel mixture.
Explains kickback phenomenon and how to avoid it.
Lists proactive steps to minimize kickback risks during operation.
Advises on proper body positioning and grip for effective control.
Familiarizes the user with the saw's controls and adjustments.
Explains the function of the throttle lockout mechanism.
Details how the fast idle lock operates for starting.
Notes that new chains stretch and require frequent tension checks.
Provides essential pre-operation checks and safety advice.
Explains the importance and procedure for lubricating the bar and chain.
Details the correct procedure for mixing and adding fuel.
Describes how to properly shut off the engine.
Provides step-by-step instructions for starting the engine.
Outlines the procedure for starting a warm or recently used engine.
Offers solutions for engines that fail to start or are flooded.
Offers general advice for efficient and safe saw operation.
Details the methods and precautions for felling trees safely.
Explains the notch method for felling larger diameter trees.
Describes the specific cuts required for felling large trees.
Covers the process of cutting felled trees into desired log lengths.
Details techniques for cutting logs, including handling pinched saws.
Explains how to cut logs that are not supported.
Describes cutting logs that are placed on a support or another log.
Provides instructions for removing branches from felled trees.
Details the process of removing branches from a felled tree.
Explains how to prune limbs from a tree.
Outlines routine maintenance tasks and their recommended frequency.
Offers general advice on maintaining the unit and warranty.
Explains the importance and method of lubricating the saw.
Guides on inspecting the saw for worn or damaged components.
Lists common parts and fasteners to check for tightness.
Details the procedure for checking and adjusting chain tension.
Explains how to determine if the chain is sharp and the need for sharpening.
Mentions that chain sharpening requires special tools or professional service.
Lists conditions that require guide bar maintenance or replacement.
Provides instructions for cleaning the saw's exterior and labels.
Details the importance and procedure for cleaning the air filter.
Explains how to inspect and clean muffler components for performance.
Describes the cleaning frequency and method for the spark arrestor screen.
Provides instructions and specifications for replacing the spark plug.
Guides on when and how to replace the saw chain.
Details the process of adjusting the chain tension.
Explains how to clean the fuel filter to ensure proper fuel flow.
Provides critical steps for adjusting the carburetor for optimal performance.
Advises on cleaning and protecting external parts before storage.
Provides guidance on fuel system preparation for storage.
Describes engine preparation for long-term storage to prevent damage.
Addresses issues related to the engine failing to start or run briefly.
Explains causes and remedies for improper engine idling.
Details problems with acceleration, power, and stalling under load.
Discusses causes and solutions for excessive engine smoke.
Covers reasons for the engine overheating and potential fixes.
Addresses issues with insufficient oil supply for bar and chain lubrication.
Explains why the chain might move when the engine is idling.
Discusses reasons why the chain fails to move when the throttle is applied.
Covers causes for noisy or rough chain cutting performance.
Explains why the chain might stop abruptly during a cut.
Addresses issues causing the chain to cut unevenly or at an angle.
General