To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 358.350830 and is the answer not in the manual?
General| Engine Type | 2-cycle |
|---|---|
| Oil Capacity | 6.8 oz |
| Type | Gas-powered |
| Chain Pitch | 3/8 inch |
| Chain Gauge | 0.050 in |
| Bar Length | 16 inches |
Instructions and precautions for safe chain saw operation.
Guidelines for keeping the chain saw in proper working condition.
Precautions for safe handling and mixing of fuel.
Information on understanding and avoiding kickback during operation.
Explanation of rotational, pinch, and pull-in kickback causes.
Tips to minimize the risk of kickback during cutting.
Proper grip, stance, and body positioning for saw control.
Role of the front hand guard in reducing kickback hazards.
Features of reduced-kickback guide bars and low-kickback chains.
Details on the chain brake's function and activation to stop the chain.
Information regarding the assembly of the chain saw unit.
Details about the spark arresting screen and its compliance.
Identification and function of major chain saw controls and features.
Explanation of the chain brake's function and chain tension adjustment.
Importance and procedure for lubricating the guide bar and chain.
Instructions for safely fueling the chain saw with the correct fuel mixture.
Step-by-step guide for starting a cold or recently used engine.
Procedure for starting a warm engine or one that has run out of fuel.
Troubleshooting steps for flooded or difficult-to-start engines.
How to check and use the chain brake's braking functions.
General advice for efficient and safe chain saw operation.
Methods and safety precautions for felling trees.
Detailed steps for felling trees 6 inches or larger using the notch method.
Techniques for cutting felled trees into manageable log sizes.
How to cut logs supported by other logs or the ground.
Methods for cutting logs supported on stands or logs.
Safe methods for removing branches from a felled tree.
Guidelines for pruning branches, limiting height and cut types.
Owner's duties for maintaining the chain saw as per the manual.
Inspecting for loose fasteners and damaged or worn parts.
Procedure for checking and adjusting chain tension.
How to determine if the chain needs sharpening.
Steps for cleaning, filing, and maintaining the guide bar.
Instructions for lubricating parts and cleaning the unit.
Procedure for cleaning or replacing the air filter for optimal performance.
Inspection and cleaning of the muffler and spark arresting screen.
Steps for replacing the spark plug and fuel filter.
Guidance on chain sharpening tools and chain replacement.
Procedures for adjusting the carburetor for optimal engine performance.
Instructions for storing the chain saw, including seasonal storage.
Tips for managing the fuel system before storage and engine care.
Common engine problems and their remedies for starting and idling.
Further common issues and solutions for engine performance and chain problems.
Explanation of owner's rights and responsibilities under the emissions warranty.
Instructions on how to file a warranty claim and locate service centers.
Details about the engine's emissions compliance and maintenance.
