To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 358.350660 and is the answer not in the manual?
General| Engine Type | 2-Cycle |
|---|---|
| Engine Displacement | 42cc |
| Bar Length | 18 inches |
| Weight | 10.6 lbs |
| Type | Gas Chainsaw |
| Chain Pitch | 3/8 in |
| Chain Gauge | 0.050 inch |
| Oil Capacity | 6.8 fl oz |
| Oil Tank Capacity | 6.8 fl oz |
Instructions and precautions for operating the chain saw.
Guidelines for keeping the saw in optimal working condition.
Information on preventing and understanding kickback.
Techniques and practices to minimize kickback risk.
Critical steps before commencing engine operation.
Instructions for mixing and adding fuel.
Ensuring the chain brake is disengaged.
Steps for starting a cold or fuel-depleted engine.
Steps for starting an engine that has recently run.
Procedure for checking and adjusting chain tension.
Steps for removing and installing a new saw chain.
Procedure for adjusting chain tension.
Warning and procedure for adjusting the carburetor.
Common causes and remedies for starting issues.
Causes and solutions for improper engine idling.
Reasons for poor acceleration and power loss.
Causes and fixes for excessive engine smoke.
Factors contributing to engine overheating and solutions.
Issues with bar and chain lubrication.
Problems with the chain moving when the engine is idling.
Situations where the chain fails to engage.
Causes for rough chain operation or cutting.
Reasons the chain stops unexpectedly during a cut.
Problems leading to the chain cutting unevenly.
