Craftsman 358.350980 User Manual

Operator's Manual
I CRRFTSMRN°I
3.1 cu.in./50cc 2-Cycle
GASOLINE CHAIN SAW
Model No.
358.350980 - 20 in. Bar
• Safety
• Assembly
• Operation
• Maintenance
• Parts List
• Espa_ol, p. 30
WARNING:
Read and follow all Safety Rules and Operating
Instructions before first use of this product.
For answers to your questions about this product:
Call 7 am-7 pm, Mon-Sat; Sun, 10 am-7 pm
1-800-235-5878 (Hours listed are Central Time)
Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A.
115257426 Rev. 6 9/30/10 BRW

Craftsman 358.350980 Specifications

General

Weight	10.5 lbs
Bar Length	16 inches
Oil Capacity	6.8 fl oz
Type	Gas Chainsaw
Chain Pitch	3/8 in
Chain Gauge	0.050 inch
Engine Type	2-stroke

Summary

Identification of Symbols

Starting Reminder

Provides a step-by-step guide for starting the chain saw engine, including choke and primer use.

Safety Rules

Plan Ahead

Guidelines for preparing the work area and ensuring user readiness before operation.

Operate Your Saw Safely

Instructions for safe handling and use of the chain saw during operation.

Maintain Your Saw in Good Working Order

Procedures for keeping the saw in safe, operational condition and understanding maintenance.

Handle Fuel With Caution

Guard Against Kickback

Maintain Control

Kickback Safety Features

Safety Notice

Assembly

Know Your Chain Saw

Familiarizing yourself with the chain saw's parts and controls before operation.

Operation

Controls and Fluids

Fueling Engine

Guidance on correctly mixing fuel and oil for the engine and safe fueling procedures.

Fuel Requirements

Starting a Cold Engine

Starting Procedures and Operation Tips

Braking Function Control

Procedure to check the proper functioning of the chain brake mechanism.

Tree Felling Techniques

Felling Large Trees

Describes the notch method for felling trees, ensuring directional control.

Cutting a Fallen Tree (Bucking)

Types of Cutting Used for Bucking

Details overcutting and undercutting methods for safely bucking logs.

Bucking Without a Support

Limbing and Pruning

Maintenance

Customer Responsibilities

Outlines the owner's responsibility for performing regular maintenance and keeping records.

General Recommendations

Advice on maintaining the unit for warranty coverage and optimal performance.

Checking Parts and Tension

Check Chain Tension

Detailed steps to check and adjust chain tension correctly for safe operation.

Check Chain Sharpness

How to determine if the chain is dull and the impact on cutting performance.

Guide Bar and Air Filter Maintenance

Check Guide Bar

Identifying guide bar wear and performing necessary maintenance like cleaning grooves.

Clean Air Filter

Steps for cleaning the air filter to maintain engine efficiency and longevity.

Muffler, Spark Arresting Screen, and Spark Plug Maintenance

Inspect Muffler and Spark Arresting Screen

Ensuring the muffler and spark screen are clean and functional for performance and safety.

Replace Spark Plug

Guidance on replacing the spark plug to ensure easy starting and optimal engine running.

Service and Adjustments

Chain Sharpening

Detailed instructions on how to properly sharpen the chain cutters for optimal cutting and safety.

Chain Replacement

Chain Adjustment and Carburetor

Chain Adjustment

Instructions for setting the correct chain tension, crucial for safe operation.

Carburetor Adjustment

Guidance on adjusting the idle speed and other carburetor settings for optimal engine performance.

Storage

Fuel System Storage

Steps for preparing the fuel system for storage, including draining the tank.

Engine Storage Preparation

Instructions for preparing the engine for storage, including oiling and spark plug care.

Troubleshooting Table

Emission Control Warranty Statement

Warranty Claims and Emission Parts