Craftsman 358.350982 User Manual

Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A.
Model No.
358.350982 - 20 in. Bar
3.1 cu.in./50cc 2-Cycle
GASOLINE CHAIN SAW
WARNING:
Read and follow all Safety Rules and Operating
Instructions before first use of this product.
For answers to your questions about this product:
Call 7 am--7 pm, Mon--Sat; Sun, 10 am--7 pm
1-800-235-5878
Operator’s Manual
(Hours listed are Central Time)
• Safety
• Assembly
• Operation
• Maintenance
• Parts List
• Español, p. 30
589441501
Rev. A 2016--08--22 KAP
LDA
V50CS

Craftsman 358.350982 Specifications

General

Engine Type	2-cycle
Engine Displacement	42cc
Bar Length	18 inches
Oil Capacity	6.8 oz
Type	Gas-powered
Power Output	Unknown
Chain Pitch	3/8 inch
Chain Gauge	0.050 inch

Summary

Warranty and Protection Plans

Warranty Statement

Details the two-year full warranty and additional crankshaft warranty.

Repair Protection Agreements

Explains the benefits of purchasing an extended service plan.

Identification of Symbols

Safety Rules

Operating Your Saw Safely

Guidelines for safe operation of the chainsaw.

Maintaining Your Saw in Good Working Order

Recommendations for keeping the saw in proper working condition.

Chainsaw Operation

Know Your Chain Saw

Identify major components and controls of the chainsaw.

Starting Procedures

Steps for starting a cold or warm engine.

Operating Tips

Advice for safe and efficient chainsaw use.

Maintenance and Service

Customer Responsibilities

Owner's duties in maintaining the chainsaw.

Checking and Maintaining Key Components

Guidance on checking chain tension, sharpness, and guide bar.

Replacing Spark Plug and Fuel Filter

Procedures for replacing essential engine parts.

Service and Adjustments

Chain Sharpening

How to properly sharpen the chainsaw chain.

Chain Replacement

Steps for replacing the chainsaw chain.

Carburetor Adjustment

Adjusting the engine's idle speed and mixture.

Storage Procedures

Troubleshooting Guide

Emissions Control Warranty