Craftsman 358.356280 User Manual

"k
• ,k
IMPORTANT MANUAL
• ,,IHI
manual
• Assembly
• Operation
• Maintenance
• Repair Parts
MODEL NO.
358-356280-2.8/18 '_
358.356330-3.3/20"
=7
,_WARNING:
Carefully read and follow
Safety Rules, Precautions
and Operating Instructions.
Failure to do so can result
inserious personal injury.
........ t=- "-% - " •
530-067180-5.-01t30/90
Not Throw
SF_/_RS/ I:RRFTSMRN_
'228/i8" ' 3.3/20"
SAWGASOLINE CHAIN
Record in the space provided below the Model No. and Serial No. of
your saw. These numbers are located _n the starting instructions
decal.
,,,,,u
Model No. Serial No.
Away
H
Retain "th_se numbersforfuture reference:
Sears, Roebuck and Co., Cl_ea__,o_), Ill. 60684 U.S.A.
""'. '...........i"............... @Seats, Roebuck and C0., 1990

Craftsman 358.356280 Specifications

General

Engine Type	2-cycle
Engine Displacement	42cc
Bar Length	18 inches
Oil Capacity	6.8 oz
Type	Gasoline
Chain Pitch	3/8 inch
Chain Gauge	0.050 inch

Summary

Chain Saw Safety

Guard Against Kickback

Explains how to prevent dangerous kickback reactions.

Kickback Warning

Details the cause and effect of kickback.

Reducing Kickback

Provides steps to minimize kickback hazards.

Maintaining Control

Offers guidance on maintaining a firm grip and body posture.

Plan Ahead

Avoid Reactive Forces

Handle Fuel With Caution

Provides safety instructions for handling fuel.

Operate Your Saw Safely

Lists safe operating procedures for the chain saw.

Maintain Saw in Good Working Order

Chain Saw Overview

Kickback Safety Features

Explains features designed to reduce kickback.

Chain Saw Setup and Preparation

Attaching the Handguard

Attaching the Bar and Chain

Chain Tension

Explains the importance and procedure for chain tensioning.

Fueling Your Engine

Covers fuel safety, mixture, and filling procedures.

Bar and Chain Lubricant

Details bar and chain lubrication methods and oil types.

Operating the Chain Saw

Control Devices

Starting Instructions

Provides step-by-step instructions for starting the engine.

Chain Saw Cutting Techniques

Basic Cutting Technique

Offers fundamental techniques for cutting wood.

Understand Reactive Forces

Explains pinch-kickback and pull-in forces.

Tree Felling Techniques

Guides on planning and executing tree felling.

Felling Small Trees (<6" Diameter)

Details felling techniques for small trees.

Felling Large Trees (>=6" Diameter)

Explains the notch method for felling large trees.

Bucking

Types of Cutting Used

Debranching and Pruning

Chain Saw Maintenance

Guide Bar and Chain

Chain Maintenance

Sharpening Instructions

Spark Arrestor and Spark Plug

Starter Rope Repair and Replacement

Carburetor Adjustments

Explains how to adjust the carburetor for optimal performance.

Clutch and Drum/Sprocket

Trouble Shooting Chart

A chart to diagnose and remedy common engine problems.