To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 358.360180 and is the answer not in the manual?
Restricts saw use to adults who understand safety rules and operating instructions, emphasizing preparation.
Maintain a good, firm grip with both hands for control; keep left arm straight with elbow locked.
Designed to reduce the chance of left hand contacting the chain if hand slips off the front handlebar.
Designed with distance and in-line position for balance and resistance in controlling saw pivot.
Small radius tip reduces kickback danger zone; demonstrated to significantly reduce kickbacks.
Meets kickback performance requirements; reduces chance and magnitude of kickback.
Lists all items included in the carton; check for completeness and damage.
Familiarize yourself with the saw's controls and adjustments before operating.
Identifies and explains key controls like ON/STOP switch, throttle trigger, choke, and primer bulb.
Explains the importance of bar and chain lubrication, tank capacity, and oil type.
Details the correct fuel mixture ratio, type of gasoline, and oil recommendations.
Covers engine stopping, starting position, and safe handling during operation.
Procedure for starting a warm engine, involving choke, switch, and throttle trigger.
Addresses flooded engines and lists steps for clearing excess fuel and starting.
Details the notch method for felling large trees, including planning and cut execution.
Explains overcutting and undercutting techniques for bucking logs, including safety precautions.
Instructions for limbing a downed tree, starting from the base and working towards the top.
Operator's duties for maintaining the unit according to the manual for warranty and performance.
Advises on periodic adjustments and replacement of parts like spark plug and air filter for optimal performance.
Requires special tools; can be purchased at Sears or done by a professional sharpener.
Procedure for replacing the chain, including safety precautions and tension adjustment.
Procedure for adjusting idle speed using the 'T' screw to prevent chain movement or stalling.
Instructions for preparing the saw for long-term storage, including cleaning and oiling.
Steps for engine storage, including spark plug removal, oiling, and filter cleaning.
Owner is responsible for required maintenance; Sears may deny warranty for abuse or neglect.
Details warranty period, what is covered, diagnosis, and consequential damages.
General