To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 358.360380 and is the answer not in the manual?
Guidance for safe operation planning, emphasizing adult user supervision and preparation.
Strategies and precautions to minimize the risk of kickback when operating a chain saw.
Awareness of situations causing material to pinch the chain, leading to sudden stops.
Techniques to prevent the chain from contacting foreign objects and causing sudden stops.
Tips for maintaining a firm grip and proper stance to ensure control during operation.
Description of features designed to reduce kickback hazards, like hand guards and low-kickback chains.
List of items included in the product packaging to verify completeness.
Identification and description of the various parts and controls of the chain saw.
Explanation of how to use the main switch to start and stop the engine.
Description of the trigger that controls the engine speed.
Explanation of the safety feature preventing accidental throttle trigger activation.
Information on using the lever for cold starting and fast idle.
Details on how the primer bulb aids in starting the engine.
Explanation of the chain brake's function and manual activation/disengagement.
Importance and initial checks for maintaining proper chain tension.
Instructions for filling and the importance of lubricating the guide bar and chain.
Procedure for correctly mixing fuel and oil and safely filling the fuel tank.
Procedure for safely shutting down the engine.
Correct stance and setup for starting the chain saw safely.
Key reminders for safe and effective engine starting procedures.
Step-by-step guide for starting a cold or recently used engine.
Instructions for starting an engine that is already warm.
Troubleshooting steps for a flooded engine or starting issues.
Detailed method for cutting a notch and felling large trees in the desired direction.
Techniques for cutting fallen trees into desired log sizes.
Instructions for safely removing branches from a felled tree.
Guidelines for safely cutting branches, limiting height and technique.
Owner's duties for maintaining the unit according to the manual's instructions.
Procedure for inspecting the saw for wear and damage and identifying parts needing replacement.
Guidance on checking for and tightening loose screws, nuts, and other components.
Instructions on how to check and adjust the chain tension for safe operation.
How to determine if the chain is sharp and the process for sharpening.
Conditions requiring guide bar maintenance and how to perform it.
Reference to the fueling section for checking the fuel mixture.
Information on purchasing tools for chain sharpening or seeking professional service.
Steps for replacing the chain, including safety precautions and part specifications.
Detailed steps for adjusting the chain tension after installation or during use.
Instructions for adjusting the carburetor for optimal engine performance and idle speed.
Preparation steps for storing the chain saw for extended periods, such as off-season.
Continued table of common problems, their causes, and recommended remedies for the chain saw.
Explanation of owner's rights and responsibilities regarding the emissions control system warranty.
Details on what the manufacturer's warranty covers for emissions-related parts.
Owner's obligations for maintenance and proper use to maintain warranty coverage.
Specifics on which parts and services are covered under the emissions warranty.
Exclusions from warranty coverage, such as abuse, neglect, or improper maintenance.
Information on Sears' liability for damages to other components caused by warranted part failure.
Policy regarding the use of non-original parts and their impact on warranty claims.
Instructions on how to initiate a warranty claim or seek service.
Information on locating authorized service centers for warranty repairs.
Details on approved parts and services for emission-related maintenance.
General