To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 358.797961-22cc and is the answer not in the manual?
Provides contact details and operating hours for customer support.
Safety instructions for the operator during use, including PPE and personal conduct.
Safety rules related to the unit and its maintenance procedures.
Safety guidelines for handling and storing fuel.
Safety guidelines to follow during the operation of the blower.
Safety precautions for transporting and storing the unit.
Information regarding health risks from prolonged vibration exposure.
Warning about objects being thrown violently by the blower and required protection.
Defines the safety zone around the operating blower to keep people and animals away.
Emphasizes the importance of reading and following all manual instructions for safety.
Details the air velocity and volume performance for different model numbers.
Lists engine type, RPM, and fuel/oil mixture requirements.
Information on ignition system and spark plug gap.
Information regarding state-specific engine emission regulations and spark arrestors.
Lists the tools needed for assembling the blower unit.
Steps for safely removing the blower from its packaging.
Step-by-step guide to assembling the blower tube with its nozzle.
Instructions for attaching the vacuum bag to the elbow tube.
Detailed steps for connecting the vacuum tubes to the unit.
Guidance on how to properly adjust the shoulder strap for comfortable use.
Steps to convert the unit from vacuum mode to blower mode.
A checklist to ensure all parts are secure and the assembly is correct.
Identifies and explains the function of the blower's controls and components.
Specific safety warnings related to using the unit as a blower.
Reiteration of operator safety measures during use.
Safety checks to perform on the unit itself before and during operation.
General safety advice applicable to both blower and vacuum modes.
Provides practical advice and suggestions for using the blower effectively.
Specific tips for optimizing blower performance and usage.
Specific tips for optimizing vacuum performance and usage.
Important checks and information to review before starting the engine.
Details on the type of gasoline and oil mixture required for the engine.
Information on using fuel stabilizers for storage and fuel longevity.
Recommendations and warnings regarding the type of engine oil to use.
Step-by-step instructions for correctly mixing gasoline and oil.
Instructions on how to properly shut down the engine.
Guidance on the correct position and preparation before starting the engine.
Detailed steps for starting the engine when cold or after it has flooded.
Instructions for starting the engine when it is already warm.
A recommended schedule for performing regular maintenance tasks.
Advice on maintaining the unit for warranty and optimal performance.
Instructions for cleaning the exterior of the blower and its labels.
Essential checks to perform before operating the unit.
Guidance on inspecting parts for damage or wear.
Instructions for ensuring all fasteners and parts are secure.
Step-by-step instructions for cleaning the air filter.
Guidance on how and when to replace the spark plug.
Detailed instructions for adjusting the carburetor for optimal performance.
Steps to prepare the unit before performing carburetor adjustments.
Initial preset settings for the carburetor if the engine won't start.
Procedure for adjusting the engine's idle speed.
Steps for adjusting the fuel/air mixture for correct engine operation.
How to check and correct issues with engine acceleration.
Detailed instructions for replacing a broken or worn starter rope.
Steps to repair or replace the starter rope assembly.
Instructions on how to clean or replace the fuel filter.
Steps to prepare the blower for long-term storage.
Procedures for preparing the fuel system for storage.
Steps to protect the engine during storage.
General advice for storing the unit and related items.
General