To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 486.244121 and is the answer not in the manual?
General| Clearing Width/Cutting Width | 24 inches |
|---|---|
| Intake Height/Cutting Height | 21 inches |
| Deck Material | Steel |
| Wheel Size | 13 inches |
| Oil Capacity | 20 oz |
| Engine | 208cc |
Important safety warnings and precautions for operating the dozer blade.
Details the warranty coverage, duration, and exclusions for the dozer blade.
Detailed list of all parts and hardware included in the package.
Comprehensive list of part numbers and descriptions for model 486.244121.
Lists the specific tools needed to assemble the dozer blade.
Covers initial steps like assembling angle lock bars and springs.
Instructions for attaching the blade assembly to the tractor frame.
Details the assembly of lift and angle control mechanisms.
Instructions for attaching the assembled blade to the tractor.
Familiarization with all controls and adjustments on the tractor and dozer blade.
Adjusting angle lock bars if they do not disengage properly.
Adjusting spring tension for blade trip action.
Adjusting blade shoes for different terrain and cleaning needs.
Checks for secure bolts, nuts, and hairpin cotters during operation.
Oil all pivot points to ensure they work freely.
Reversing the scraper bar to utilize the unused top edge after extensive use.
Proper procedures for storing the dozer blade when not in use.
Lower the blade to the ground and prepare for detachment.
Remove hairpin cotters and disconnect the lift arm link.
Remove hairpin cotters and clevis pins to detach the lift assembly.
Remove hairpin cotters to release the handle assembly from the tractor.
