To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 536.292522 and is the answer not in the manual?
General| Manufacturer | Craftsman |
|---|---|
| Model Number | 536.292522 |
| Category | Tiller |
| Engine Displacement | 208cc |
| Tine Count | 4 |
| Forward Speeds | 1 |
| Reverse Speeds | 1 |
Key safety guidelines for operating the cultivator, emphasizing awareness and precautions.
Steps and precautions to take before starting and operating the cultivator.
Guidelines for safe handling, storage, and use of fuel for the cultivator.
Critical safety instructions for operating the cultivator, including user restrictions and environmental awareness.
Recommendations for storing the cultivator properly for extended periods.
Safety precautions to follow when performing maintenance or adjustments on the cultivator.
Explanation of symbols used for controlling and operating the cultivator.
Identification and meaning of various safety warning symbols found on the unit.
List of components included separately in the cultivator's packaging.
Step-by-step instructions for safely removing the cultivator from its shipping carton.
Procedures for adjusting and securing the cultivator's handle to the upright position.
A pre-operation checklist to ensure proper setup and understanding of controls.
Overview of the cultivator's main controls and their functions, with an illustration.
Critical advice on wearing appropriate eye protection during operation.
Instructions on the correct procedure for stopping the cultivator's engine.
Method for adjusting the depth stake to control tilling depth and forward speed.
Step-by-step guide on starting and operating the cultivator for tilling.
Essential pre-start checks and safety warnings related to the engine and fuel.
Detailed instructions for correctly mixing gasoline and two-cycle oil for the engine.
Comprehensive steps for starting the cultivator's engine, including choke and throttle adjustments.
Advice on optimal tilling practices, soil conditions, depth, and clearing vegetation.
Guidance on using the cultivator for loosening soil around plants and removing weeds.
Table outlining regular service tasks and responsibilities for maintaining the cultivator.
Key technical details and specifications of the Craftsman cultivator.
Advice on periodic adjustments and seeking professional service for optimal performance.
Instructions for lubricating the gearbox and tine shaft at specified intervals.
Steps for removing debris, cleaning, and lubricating the cultivator tines after use.
Procedures for checking, cleaning, and replacing the spark plug for engine health.
Detailed instructions for cleaning and oiling the foam air filter to maintain engine performance.
Recommendation to have cylinder exhaust ports cleaned by a service center.
Step-by-step guide for safely removing and correctly installing the cultivator tines.
Specific instructions for correctly mounting tines, ensuring proper orientation and fit.
Detailed procedure for adjusting the carburetor mixture and idle speed for optimal engine operation.
Steps for preparing and storing the cultivator for extended periods, including cleaning and handle folding.
Procedures to prevent fuel system damage during storage, focusing on fuel treatment and cylinder protection.
A table listing common operational problems, their causes, and recommended solutions.
Illustrated parts breakdown with key numbers, descriptions, and part numbers for the main assembly.
Illustrated parts list for the transmission and depth rod components.
Illustrated parts list for tine assemblies, shields, and related hardware.
Illustrated parts list for the wheel support assembly, including wheels and associated hardware.
Illustrated parts list for the upper and lower handle assemblies, including controls and grips.
Illustrated breakdown of various engine components with key numbers and part references.
Detailed listing of engine parts, including cylinders, crankcases, and internal engine components.
Listing of parts related to the air filter, fuel line, fuel tank, and related components.
Detailed illustration of carburetor components with key numbers for identification.
Comprehensive list of carburetor parts, including diaphragms, jets, and gaskets.
Illustrated list of parts for the rewind starter mechanism, including rope and handle.
