Do you have a question about the Craftsman 536.886120 and is the answer not in the manual?
Engine Displacement | 208cc |
---|---|
Clearing Width | 21 inches |
Drive Type | Self-Propelled |
Engine Type | 4-cycle |
Throw Distance | Up to 30 feet |
Starter Type | Electric start |
Chute Control | Manual |
Auger Material | Steel |
Skid Shoes | Adjustable |
Read manual, understand controls, know how to stop, and keep children away for safe operation.
Inspect area, remove foreign objects, check fuel, wear proper attire, and prepare equipment.
Check bolts, store safely, maintain labels, run engine to prevent freeze-up.
Read safety rules, follow maintenance schedule, and adhere to manual instructions.
List of tools needed and steps for removing the snow thrower from its carton.
Setting up the snow thrower, including handle and shifter assembly.
Familiarize yourself with the location and function of all controls and adjustments.
Instructions for stopping, controlling snow discharge, and moving the machine.
How to use the wheel lockout pin for improved maneuverability.
Steps to take before starting the engine, including oil and fuel checks.
Procedures for stopping the engine and starting it via electric starter.
Advice on warm starts, frozen starters, and general snow throwing techniques.
Covers general recommendations, after first use checks, and lubrication procedures.
Engine oil requirements, lubrication, and spark plug maintenance for optimal performance.
Adjust skid height and scraper bar for optimal snow clearing and surface protection.
Adjust clutch control cables, drive belts, and friction wheel for proper machine operation.
Procedure for replacing the safety shear bolt on the auger.
Fine-tuning the carburetor for optimal engine performance.
Adjusting the spark plug gap or replacing it for starting issues.
Comprehensive steps for cleaning and preparing the snow thrower and engine for storage.
Essential information needed when ordering replacement parts for your snow thrower.