Need help?Do you have a question about the Craftsman 536.886150 and is the answer not in the manual?
General| Engine | 208cc |
|---|---|
| Clearing Width | 21 inches |
| Engine Type | 4-Cycle |
| Auger Material | Steel |
| Chute Control | Crank |
| Weight | 95 lbs |
| Speed | 6 Forward / 2 Reverse |
| Drive System | Friction disc |
| Starter Type | Electric / Recoil |
| Fuel Tank Capacity | 3 quarts |
Guidance on operating the snow thrower safely, including operator training and precautions.
Steps for preparing the snow thrower and handling fuel safely before operation.
Lists required tools and components for assembling the snow thrower.
Instructions for removing the snow thrower from the carton and installing the handles.
Steps for attaching the shifter lever, connecting cables, and assembling the snow chute.
Essential checks before starting and overview of all major controls.
Procedures for starting, stopping, moving forward/backward, and throwing snow.
How to adjust snow discharge direction and advice for efficient snow throwing.
Detailed steps for starting the engine via electric or recoil starter and stopping it.
Guidelines for owner maintenance tasks and recording service history.
Details on lubrication points, frequency, types of lubricants, and engine oil maintenance.
How to adjust skids, scraper bar, and clutch control cables for proper function.
Instructions for adjusting and replacing drive belts, belt guides, and friction wheel.
Procedures for adjusting the carburetor and spark plug for optimal performance.
Steps for cleaning, lubricating, and preparing the snow thrower and engine for storage.
Advice for storing the snow thrower, including covering and placement.
Identifies common problems, their causes, and recommended corrections.
To Next Page