To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 580.752500 and is the answer not in the manual?
General| Power Source | Gasoline |
|---|---|
| Pressure Rating | 2500 PSI |
| Pump Type | Axial Cam |
| Hose Length | 25 ft |
| Engine Displacement | 190 cc |
| Maximum Pressure | 2500 PSI |
| Soap Tank | Yes |
| Wheels | Yes |
| Rated Pressure | 2500 PSI |
| Nozzle Types | 40°, Soap |
| Engine Type | 4-cycle OHV |
Details the warranty for defects in material and workmanship within two years.
Explains benefits of the optional protection plan for repairs.
Covers general safety alerts, symbols, and their meanings.
Details risks from engine fumes, carbon monoxide, and chemicals.
Covers starter cord kickback, electric shock, and fuel flammability risks.
Addresses risks from high-pressure water streams and hot mufflers.
Details risks of falls, eye injuries, and entanglement with moving parts.
Covers safe operation practices and avoiding damage.
Introduces controls and components with a diagram.
Identifies and describes key parts of the pressure washer.
Instructions for unpacking and checking parts.
Step-by-step guide for attaching the handle and tray.
Lists sequential steps before first use.
Specifies fuel type, octane, and warnings for adding fuel.
Fuel needs at high altitudes and details on the fuel cap.
Steps for connecting the high-pressure hose.
Connecting garden hose and purging air.
General guidance on operation.
Safety guidelines for placement.
Step-by-step engine start procedure.
Explains different spray patterns and their uses.
Advice on cleaning distance and tip care.
Steps for using the detergent siphoning system.
Instructions for rinsing surfaces after cleaning.
How to flush the detergent system.
Details engine specs and emissions compliance.
Explains engine power ratings and factors affecting performance.
Lists key performance metrics for the unit and engine.
Outlines owner's duties and the service schedule.
Provides advice on maintenance and pre-operation checks.
Notes on pump lubrication and emission system service.
Instructions for cleaning debris and inspecting hoses.
Covers spray gun, tip, and O-ring checks and maintenance.
Recommended oil types and viscosity by temperature.
Procedures for preparing fuel system and pump for storage.
Using fuel stabilizers and general storage advice.
Troubleshooting common pump and detergent siphoning problems.
Diagnosing and fixing engine operational problems.
Illustrated breakdown and list of main unit components.
List of parts not shown in the diagram.
List of available optional accessories.
Overview of warranty terms and consumer duties.
Details warranty duration and specific provisions.
Lists parts covered by the emissions warranty.
Specifies the warranty period.
How to find emissions compliance data on the engine label.
