Craftsman 79653 - 12 Amp Edger User Manual

Instruction Manual for Electric Edger
EZ.Edge.n.Store
Model No. 71.79653
BEFORE RETURNING THIS PRODUCT
FOR ANY REASON PLEASE FIRST CALL
(800) 539-6455
IN MOST CASES A CRAFTSMAN
REPRESENATIVE WILL BE ABLE TO
HELP YOU SOLVE YOUR ISSUE OVER
THE PHONE.
iMPORTANT OPERATING HINTS:
• When starting unit, first push in the
safety switch and then squeeze the
main trigger. It is NOT necessary
to keep the safety switch pushed in
during use.
• Stay to the left and behind the edger
when in use. The edger will push
clippings and other debris forward,
away from the user.
I
• This is a powerful cutting tool. Be
AWARE of your surroundings.
CAUTION:
Before using this product, read this manual and follow
all its Safety Rules and Operating Instructions.
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
www.sears.com/craftsman

Craftsman 79653 - 12 Amp Edger Specifications

General

Brand	Craftsman
Model	79653 - 12 Amp Edger
Category	Edger
Language	English

Summary

Safety Instructions

Electrical Safety Warnings and Information

Extension Cord Wire Size Guide

Table specifying minimum wire size (AWG) for extension cords based on length and amperage.

Ground Fault Circuit Interrupter (GFCI) Protection

Recommends GFCI protection for the circuit or outlet used with the edger.

Operational Safety Warnings

Blade Area Safety

Keep body parts away from the blade and be aware of coasting.

Personal Protective Equipment

Safe Operating Environment

Operation

Turning the Edger On

Edging Instructions and Techniques

Tips for safe operation, cord management, balance, and avoiding wet conditions.

Maintenance and Storage

Clearing Jams

Safely remove obstructions after the blade has stopped.

Blade Cleaning

Blade Change/Turn

Troubleshooting

Safety Switch Difficult to Hold

Unit Will Not Operate

Troubleshooting steps for power issues, including connections and GFCI.

Motor Running Slow