To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 917.20393 and is the answer not in the manual?
General| Engine | Briggs & Stratton |
|---|---|
| Engine Type | 4-Cycle |
| Engine Displacement | 140cc |
| Cutting Width | 21 inches |
| Cutting Height | 1.25 - 3.75 inches |
| Cutting Positions | 6 |
| Drive System | Self-Propelled |
| Speed Settings | Variable |
| Oil Capacity | 20 oz |
| Wheel Size (Front) | 8 inches |
| Wheel Size (Rear) | 8 inches |
| Weight | 80 lbs |
| Mulching Capability | Yes |
| Bagging Capability | Yes |
| Side Discharge Capability | Yes |
| Drive Type | Rear Wheel Drive |
| Fuel Capacity | 1.25 quarts |
| Fuel Tank Capacity | 1.25 quarts |
Essential safety practices for operating the tractor, avoiding hazards, and ensuring proper use.
Critical instructions for operating safely on slopes to prevent tip-overs and loss of control.
Emphasizes child safety around the tractor and operational recommendations.
Essential safety advice for handling gasoline to prevent fire, explosion, and personal injury.
Covers safe refueling, general service, safety features, and cleaning.
Reinforces safe operation on slopes, including maximum angles and turning.
Instructions for routing and installing mower drive belt onto engine clutch pulley.
Detailed checklist of items to verify before operating the tractor.
Explains symbols for tractor controls and operations.
Defines severity levels of hazards (DANGER, WARNING, CAUTION) and other warnings.
Identifies and illustrates location of major controls and levers.
Explains function and operation of each tractor control.
Procedures for safely stopping mower blades and shutting down the engine.
Steps for setting desired cutting height using attachment lift lever.
Instructions for engaging mower blades and operating with mower engaged.
Explains how to enable and use ROS for mowing while backing up.
Critical safety advice and procedures for operating safely on slopes.
Essential steps for checking engine oil level and adding gasoline before starting.
Instructions for starting engine, including choke usage for different temperatures.
Verifies proper function of Operator Presence System and Reverse Operation System.
Common causes and corrections for engine failing to start.
Identifies causes and solutions for difficulty starting the engine.
Addresses issues where engine fails to crank, listing causes and fixes.
Covers engine clicking but not starting, listing causes and corrections.
Lists reasons for reduced engine power and methods to resolve them.
Explains issues where engine runs with operator absent, related to safety systems.
Identifies obstructions, belt issues, or frozen components preventing blade rotation.
Explains reasons for loss of drive: freewheel control, debris, belt damage.
Addresses engine backfiring and stalling when shifting into reverse.
Provides a method to measure slopes and understand safe operating angles.
