To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 917.254722 and is the answer not in the manual?
General| Engine Displacement | 190cc |
|---|---|
| Cutting Width | 22 inches |
| Engine | Briggs & Stratton |
| Cutting Positions | 6 |
| Speed Settings | Variable |
| Wheel Size (Front) | 8 inches |
| Drive System | Rear-wheel drive |
| Cutting Height | 1.25-3.75 inches |
| Wheel Size (Rear) | 11 inches |
Instructions for removing tractor and parts from shipping carton.
Steps for filling and charging the battery before installation.
Instructions for mounting and adjusting the tractor seat.
Steps for attaching the steering wheel to the column.
Instructions for adjusting tire pressure after shipping.
Steps for placing and connecting the battery in its compartment.
Guide for attaching the mower deck to the tractor.
Procedure for removing the mower drive belt.
Instructions on how to adjust the mower drive belt tension.
How to check and adjust mower deck for level cutting.
Final checks to ensure all components are tight.
Overview of tractor controls and their functions.
Procedure for safely stopping the tractor engine and moving parts.
Steps for starting the tractor engine, including safety precautions.
How to operate the tractor with the mower attached.
Advice for effective and safe mowing practices.
Safe procedures for driving the tractor on slopes.
Information on the mower's discharge guard function.
Routine checks to perform before or after each mowing session.
Initial maintenance required after the first two hours of use.
Guide to selecting the correct engine oil based on temperature.
Maintenance checks required every five hours of operation.
Maintenance tasks to be performed every 25 hours.
Maintenance tasks for 50-hour intervals.
Maintenance tasks required every 100 hours of operation.
Diagram showing lubrication points and types of lubricant needed.
Procedure for jump-starting the tractor using another vehicle.
How to adjust the throttle cable for proper engine speed.
Steps for adjusting the fuel mixture for optimal engine performance.
Instructions for replacing the tractor's motion drive belt.
Steps to remove the tractor hood for access to components.
Procedure for detaching the mower deck from the tractor.
How to adjust the mower deck for proper cutting height and levelness.
Adjusting the mower deck for side-to-side levelness.
Adjusting the mower deck for front-to-rear cutting height.
Instructions for safely replacing mower blades.
Steps for removing and installing rear wheels.
Guidelines for maintaining proper tire pressure and condition.
Instructions for preparing the tractor for long-term storage.
Precautions for fuel system care during storage.
Procedure for draining and replacing engine oil for storage.
Steps to protect cylinders during extended storage.
How to prepare the battery for storage.
Instructions for cleaning the tractor before storage.
Common issues when starting the tractor engine.
Solutions for engine misfires, lack of power, or overheating.
Troubleshooting issues with lights and battery charging.
Addressing issues with mower performance, blades, and cut quality.
Part numbers and diagrams for electrical components.
Part numbers and diagrams for chassis and body parts.
Part numbers and diagrams for the drive system components.
Part numbers and diagrams for the steering system.
Part numbers and diagrams for the mower lift mechanism.
Part numbers and diagrams for the mower deck components.
Part numbers and diagrams for the transaxle assembly.
Parts for the engine's cylinder, crankshaft, and base.
Parts for the engine's air cleaner and carburetor.
Parts for the engine's electrical starting and charging systems.
