Do you have a question about the Craftsman 917.255430 and is the answer not in the manual?
Model Number | 917.255430 |
---|---|
Category | Lawn Mower |
Engine Type | Gasoline |
Engine Displacement | 190cc |
Cutting Width | 21 inches |
Cutting Height | 1.25 to 3.75 inches |
Cutting Height Positions | 6 |
Drive System | Rear-Wheel Drive |
Speed Settings | Variable |
Mulching Capability | Yes |
Warranty | 2-year limited |
Engine Power | 6.75 ft-lbs |
General operating instructions and precautions.
Guidelines for safe operation on slopes.
Safety considerations regarding children.
Safety precautions related to service and maintenance.
Recommended maintenance tasks and intervals.
General advice for maintaining the tractor.
Daily checks before operating the tractor.
Guide for lubrication points and types.
Equipment for lawn maintenance like bagging, sweeping, and aerating.
Attachments for snow removal, tilling, and hauling.
Lists tools, and instructions for unpacking and initial setup.
Guides steering wheel installation.
Procedures for safely removing the tractor from its skid.
Detailed steps for installing the tractor battery.
Instructions for preparing and charging the tractor battery.
Steps for installing and adjusting the tractor seat.
Verifying tire pressure, deck level, belts, and brakes.
Familiarization with tractor controls and adjustments.
Setting brake, throttle, movement, and cutting height.
Procedures for operating the mower and on slopes.
Pre-start checks and starting the engine.
Recommended maintenance tasks and intervals.
General advice for maintaining the tractor.
Daily checks before operating the tractor.
Guide for lubrication points and types.
Procedures for cleaning and maintaining the tractor battery.
Procedures for engine lubrication and changing engine oil.
Steps for servicing the air filter pre-cleaner and cartridge.
Inspection and replacement of muffler, spark plugs, and fuel filter.
General cleaning advice for the tractor.
Steps for removing and installing the mower deck.
Adjusting the tractor's braking system.
Steps for removing a wheel for repair.
Procedure for jump-starting the tractor with a weak battery.
Troubleshooting interlocks, relays, wiring, and removing hood/grill.
Adjusting the throttle control cable for proper engine speed.
Adjusting the carburetor for optimal fuel/air mixture.
Preparing the tractor for storage, including cleaning and inspection.
Preparing the engine for storage, including fuel and oil management.
Causes and corrections for engine starting and cranking problems.
Causes and corrections for loss of power and excessive vibration.
Troubleshooting battery charging and engine backfiring.