To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 917.270623 and is the answer not in the manual?
General| Model Number | 917.270623 |
|---|---|
| Category | Lawn Mower |
| Engine | Briggs & Stratton |
| Engine Type | 4-cycle |
| Cutting Width | 21 inches |
| Cutting Positions | 6 |
| Drive Type | Self-propelled |
| Speed | Variable |
| Grass Bag Capacity | 2.5 bushels |
| Weight | 80 lbs |
| Cutting Height Adjustment | Lever |
| Cutting Height | 1.25 to 3.75 inches |
| Drive System | Rear Wheel Drive |
| Warranty | 2 years limited |
Covers defects in material or workmanship for Craftsman riding equipment.
Covers defects in material or workmanship for the included battery.
Details fuel requirements for the tractor.
Specifies oil grade and volume for the engine.
Provides engine ignition and valve specifications.
Lists operational speed ranges and tire inflation requirements.
Lists necessary tools for putting the tractor together.
Instructions for safely unpacking the tractor from its shipping carton.
Steps to connect the steering column components to the tractor.
Procedures for safely moving the tractor off its shipping skid.
Guidance on battery connection and initial charge requirements.
Steps for mounting and positioning the operator's seat for comfort.
Importance of correct tire inflation for cutting performance.
Ensuring the mower deck is properly aligned for optimal cutting.
Verifying that drive and mower belts are routed correctly.
Explanation of various symbols used on the tractor and in the manual.
Function of the lever that engages mower blades and attachments.
How to start/stop the engine and monitor battery status.
Controls for engine speed, choke, and tractor movement.
Operation of the primary control for stopping and parking.
How to raise and lower the mower deck or other attachments.
Procedure for engaging the parking brake to secure the tractor.
Steps to safely disengage blades and stop the tractor's movement.
Using the motion control lever for speed and direction.
How to set the desired grass cutting height.
Crucial pre-operation check for engine lubrication.
Guidance on fueling the tractor with the correct type of gasoline.
Step-by-step instructions for starting the engine in different weather.
Procedure to remove trapped air from the transmission system.
Advice for optimal mowing performance and lawn care.
Tips for effective mulching, including cutting height and pattern.
A table outlining required maintenance tasks at specific hour intervals.
Important notes on maintaining the tractor for warranty and performance.
Routine checks to perform before operating the tractor.
Verifying the tractor's braking system is functioning correctly.
Maintaining proper tire pressure and condition.
Ensuring safety interlock systems are operational.
Instructions for sharpening, removing, and installing mower blades.
Procedures to clean battery components to prevent power loss.
Inspecting V-belts for wear and tear, and replacement.
Detailed steps for draining and refilling the engine oil.
Maintaining the air screen to prevent engine overheating.
Instructions for cleaning or replacing the air filter element.
Removing debris from cooling fins to ensure proper engine temperature.
Inspecting the muffler and replacing spark plugs.
Procedure for changing the fuel filter to ensure fuel flow.
Step-by-step guide for detaching and reattaching the mower deck.
Adjusting the mower deck for even side-to-side balance.
Adjusting the mower deck for optimal front-to-back cutting angle.
Instructions for removing and installing the mower blade drive belt.
Procedure for adjusting the tractor's braking effectiveness.
Steps for replacing the belt that drives the tractor's motion.
Fine-tuning the lever that controls speed and direction.
Instructions for safely jump-starting the tractor with a weak battery.
Steps to remove the tractor's hood and grill for access.
Fine-tuning the throttle cable for proper engine speed control.
Procedures for adjusting the engine's carburetor for optimal performance.
Steps for preparing the tractor for long-term storage.
Proper methods for storing the tractor battery.
Preparing the engine and fuel system for storage to prevent issues.
Common causes and solutions for an engine that fails to start.
Troubleshooting steps for an engine that is difficult to start.
Diagnosing issues when the engine starter motor does not engage.
Identifying and resolving causes for reduced engine power.
A diagram illustrating the tractor's electrical system connections.
Part numbers and diagrams for the tractor's electrical system parts.
Part numbers and diagrams for the tractor's frame and body components.
Part numbers and diagrams for the tractor's drive system.
Part numbers and diagrams for the tractor's steering mechanism.
Part numbers and diagrams for the engine and its accessories.
Part numbers and diagrams for the mower deck assembly.
Part numbers and diagrams for the tractor's hydrostatic transmission.
Detailed parts breakdown for the specific Briggs & Stratton engine model.
Visual guide for assessing slopes to ensure safe operation.
