Do you have a question about the Craftsman EZ3 917.270680 and is the answer not in the manual?
Model Number | 917.270680 |
---|---|
Category | Lawn Mower |
Type | Walk-Behind |
Engine | Briggs & Stratton |
Fuel Type | Gasoline |
Engine Type | 4-Cycle |
Cutting Width | 22 inches |
Drive System | Self-Propelled |
Fuel Tank Capacity | 1.6 quarts |
Mulching Capability | Yes |
Bagging Capability | Yes |
Side Discharge Capability | Yes |
Wheel Size | 8 inches (front), 11 inches (rear) |
Details the two-year warranty coverage for riding equipment parts, including maintenance requirements.
Outlines the 90-day warranty for the tractor's battery, covering defects in material or workmanship.
Provides essential instructions for the safe operation of the lawn tractor.
Details critical safety precautions and procedures for operating the tractor on slopes.
Emphasizes safety measures to protect children from hazards associated with the tractor.
Covers the tools required and the step-by-step process for assembling the tractor.
Details pre-operation setup, including rolling off skid, initial checks, and startup.
Identifies and explains the function of all major tractor controls and indicators.
Guides on starting, moving, stopping, adjusting, and general safe operation of the tractor.
Offers advice and best practices for optimal mulching performance.
Outlines routine maintenance tasks, schedules, and general recommendations for tractor care.
Lists essential safety and operational checks to perform before each use.
Details lubrication points, lubrication chart, and V-belt inspection/maintenance.
Covers maintenance for brakes, tires, operator presence system, and blade care.
Details battery care, V-belt inspection, transaxle cooling, and pump fluid checks.
Covers engine oil changes, air filter, cooling fins, muffler, spark plugs, and fuel filter.
Provides instructions for removing and installing the mower deck.
Details how to level the mower deck and adjust drive belts and brakes.
Covers adjustments for transaxle, steering, starting, and component replacements.
Guides on adjusting engine throttle control cable and carburetor settings.
Provides instructions for preparing the tractor, battery, and engine for storage.