MAINTENANCE SCHEDULE ./_ ./'_/._/_/_/,_._/
FILL IN DATES ___ •_'_ _._--/_._'__/_'_g_'/_t'_O_ _
REGULAR SERVICE /__../_.'_S E By, C E....
DATES
E_EEm
Cc_lei: B'ri::;rO_te i°n _
Check Operator Presence and
T tntedock Systtwns
R Check for Loose Fasteners I1_ _7 I1_
A, Sharpen/Replace Mower Blades _, I
T Lubrication Chart _ ll_
0 Check Battery Level
R Clean Batte W and Terminals I_
Check Transaxle Cooling
Adjust Blade Belt(s) Tension I_
,!,
Adjust Motion Drive Belt(s) Tension
Check Engine Oil Level _ I
Change En_ne Oil Ql_,t,3
E Clean Air Filter _
N Clean Air Screen
IG Inspect Muffler/Sderk Arre_er I_
Replace Oil Filter (If equipped) _:
N Clean Engine Coolirlg Fins
ReplaCe Spark Plug _
Replace Air Filter Paper Certrtdge I_=
Replace Fuel Filter
1 - Change more often when opemUng unde_ a heavy Iosd or in high a n_iQ't I temperatures. 5 - ff equipped with adJuMab_ system,
2 - Sen_,e more often when 0pemtlng in dirty or dUSty cond_1or, s. 6 - Not reqund if equ_ with rne_lermnce-free bakery.
3 - ffequlp_pedwithogiflte_,Glumge oil ev_ 5o bourn. 7 - Tl_t_ hont_ pivotbolt to 35 ft+-lt_ maximum
4 - Replace b_ades more often when mowing in sandy so_, Do not overtigMen.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not
cover items that have been subjected to
operator abuse or negligence. To
receive full value from the warranty,
operator must maintain tractor as
instructed in this manual.
Some adjustments will need to be made
periodically to properly maintain your
tractor.
All adjustments in the Service and
Adjustments section of this manual
should be checked at least once each
season.
• Once a year you should replace the
spark plug, clean or replace air filter,
and check blades and belts for wear
A new spark plug and clean air filter
assure proper air-fuel mixture and
help your engine run better and last
longer.
BEFORE EACH USE
• Check engine oil level.
• Check brake operation.
• Check tire pressure.
• Check operator presence and
interlock systems for proper operation.
• Check for loose fasteners.
LUBRICATION CHART
Zerk Zerk
_Front Wheel
Bearing Beadng Zerk
Zerk
_eneral Purpose Grease
_Refer to Maintenance "Engine"Section
IMPORTANT." Do not oil or grease the
pivot points which have special nylon
beatings. Viscous lubricants will attract
dust and dirt that will shorten the life of
the seif-lubdc_tincj beadngs. If you feel
they must be lubncated, use only a dry,
powdered graphite type lubricant
sparingly.
18
To Next Page
Loading...
