To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 917.271140 and is the answer not in the manual?
General| Displacement | 190cc |
|---|---|
| Cutting Height | 1.5 to 4 inches |
| Cutting Height Positions | 6 |
| Engine | Briggs & Stratton |
| Cutting Width | 21 inches |
| Drive System | Rear-wheel drive |
| Wheel Size (Front) | 8 inches |
Details the two-year warranty for riding equipment, covering defects.
Outlines the 90-day warranty for batteries, covering defects.
Instructions for safe general operation of the tractor, including operator responsibilities.
Guidelines for safely operating the tractor on slopes, including precautions.
Safety measures to protect children from hazards associated with the tractor.
Outlines customer duties for maintaining the tractor and adhering to safety rules.
Lists components for initial assembly, categorized by system.
Lists necessary tools for assembling the tractor.
Instructions for attaching the steering wheel assembly to the tractor.
Procedure for checking and charging the tractor battery before initial use.
Guide for adjusting and securely installing the tractor seat.
Instructions for safely driving the tractor off its shipping skid.
Explains various symbols used on the tractor and in its literature.
Details the location and function of key tractor controls and levers.
Steps to properly engage the parking brake system.
Procedures for stopping the mower blades, ground drive, and engine.
How to control the tractor's direction and speed using the motion control lever.
Procedure for checking the engine oil level before starting.
Guidelines for fueling the tractor with the correct type of gasoline.
Steps for starting the tractor's engine for the first time.
Best practices for mulching grass clippings for lawn health.
General advice for maintaining the tractor to ensure warranty coverage and performance.
How to check and adjust the tractor's brake system.
Proper tire maintenance, including pressure and avoiding damage.
Explains the function and importance of the operator presence system.
Instructions for maintaining mower blades, including removal and sharpening.
Procedures for adjusting the mower deck and drive belt.
Adjustments for brake, transmission, and steering systems.
Steps for starting with a weak battery, replacing electrical components.
Procedures for adjusting the throttle cable and carburetor.
Procedures for preparing the tractor for storage, including cleaning and lubrication.
Specific instructions for storing the engine's fuel system and oil.
Common causes and corrections for an engine that fails to start.
Diagnosing and fixing problems causing a loss of engine power.
Steps to correct uneven grass cutting results.
