To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 917.273140 and is the answer not in the manual?
General| Brand | Craftsman |
|---|---|
| Model | 917.273140 |
| Category | Lawn Mower |
| Language | English |
Covers riding equipment for two years against defects in material or workmanship.
Covers battery for ninety days against defects in material or workmanship.
Read and follow all instructions and safety rules before operating the machine.
Use extra caution on slopes; avoid slopes over 15 degrees or if uneasy.
Keep children out of the mowing area and be alert to their presence.
Handle fuels with care, keep equipment in good condition, and check safety devices.
Read safety rules, follow maintenance schedule, and maintain the tractor.
Information on purchasing an extended service agreement for repairs and maintenance.
Lists necessary tools like socket wrench set, pliers, and tire pressure gauge.
Step-by-step guide to assemble the steering wheel onto the tractor.
Instructions for attaching and adjusting the tractor seat for proper operator position.
Procedure for safely rolling the tractor off its shipping skid.
Procedure for safely driving the tractor off its shipping skid.
Steps to install or remove the mulcher plate for grass clipping management.
Explains symbols used on the tractor and in literature, and hazard alert definitions.
Familiarizes the operator with tractor controls and adjustments through illustrations.
General guide on operating the tractor safely and effectively.
Procedure for engaging the parking brake, essential for operator safety.
Guidance on operating the throttle for optimal engine and mower performance.
Explains how to control the tractor's movement using the motion control lever.
Instructions for adjusting the mower deck height for desired grass cutting.
How to adjust gauge wheels to prevent mower deck scalping.
Specific safety precautions and procedures for operating the tractor on slopes.
Instructions for preparing the tractor for towing or transport.
Pre-start checks, including engine oil level and adding gasoline.
Detailed steps for starting the engine, including warm and cold weather procedures.
Steps to remove trapped air from the transmission for proper operation.
Advice for effective mulching, including deck cleaning and cutting techniques.
A chart outlining regular service intervals and tasks for the tractor.
Important advice on operator responsibility and periodic maintenance.
Guide to lubrication points and types of lubricants required for the tractor.
A checklist of essential checks to perform before operating the tractor.
General maintenance and care for the tractor itself.
How to check and adjust the tractor's brake system for safe stopping.
Guidelines for maintaining mower blades, including sharpening and removal.
Instructions on how to sharpen and balance mower blades.
Steps for cleaning battery terminals to ensure good electrical contact.
How to keep the transmission fan and cooling fins clean for optimal cooling.
Guidance on checking V-belts for wear and replacing them if necessary.
Instructions for servicing the air filter to ensure proper engine running.
How to clean cooling areas to prevent engine damage from overheating.
Information on replacing spark plugs for optimal engine performance.
Guidance on replacing the in-line fuel filter to ensure proper fuel flow.
Step-by-step instructions for detaching the mower deck from the tractor.
How to adjust the mower deck for optimal cutting performance.
Instructions for replacing the belt that drives the mower blades.
Procedures for checking and adjusting the tractor's brake system.
Instructions for replacing the belt that drives the tractor's motion.
How to adjust the motion control lever for proper neutral positioning.
Instructions for safely removing a wheel for tire or brake service.
Guide for replacing a burnt-out headlight bulb.
Instructions for removing the tractor's hood and grill for access.
How to adjust the throttle control cable for proper engine speed regulation.
Instructions for adjusting the carburetor for optimal engine performance.
Procedures for preparing the tractor for storage.
Instructions for charging and storing the battery to maintain its condition.
How to prepare the fuel system for storage to prevent gum deposits.
Steps to protect the engine cylinders during storage.
Components related to the engine's ignition system and electrical connections.
Parts and assembly of the engine's blower housing and baffles for cooling.
Components of the engine's air intake system, including the air filter.
Details on the cylinder head, valve train, and breather components.
Information on the engine's crankcase and related parts.
Further details on the air intake and filtration system components.
Components of the engine's starting system, such as the starter motor and battery.
Parts related to engine speed and operation controls, like throttle and governor.
Components related to the engine's oil pan, oil filter, and lubrication system.
Components related to the engine's crankshaft.
Components of the engine's exhaust system.
Components of the engine's fuel system, including carburetor and fuel lines.
Decals related to wheels and tire information.
