To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 917.273221 and is the answer not in the manual?
General| Model Number | 917.273221 |
|---|---|
| Category | Lawn Mower |
| Engine Displacement | 140cc |
| Cutting Height Positions | 6 |
| Deck Material | Steel |
| Cutting Width | 21 inch |
| Cutting Height Range | 1.25-3.75 inches |
| Starter Type | Recoil |
| Wheel Size (Front) | 8 inch |
Instructions for installing the mower deck and drive belt.
Final checks for tire pressure, brakes, and general readiness.
Overview of all tractor controls, switches, and indicators.
Procedures for setting the parking brake and stopping the tractor and blades.
Guidelines for operating on slopes and preparing for transport.
Instructions for adding gasoline and starting the tractor's engine.
Procedures to warm up and purge the transmission before operation.
A schedule outlining regular maintenance tasks and general advice.
Daily checks before operation and the lubrication chart.
Checking brakes, tires, and operator presence systems.
Procedures for engine lubrication and oil changes.
How to adjust the mower housing for optimal cutting results.
Adjusting mower deck for side-to-side and front-to-back levelness.
Procedures for replacing the mower blade drive belt.
Adjusting the attachment clutch and tractor brake systems.
Checking interlocks, replacing fuses, and adjusting lift spring tension.
Adjusting choke control and the engine carburetor for optimal performance.
Procedures for removing and installing the mower drive belt.
Procedures for removing and installing the motion drive belt.
Adjusting front wheel toe-in and removing wheels for repair.
Using jumper cables and replacing headlight bulbs.
Preventing fuel system issues and preparing engine oil for storage.
Causes and corrections for engine not starting or turning over.
Causes and corrections for clicking sounds without engine starting.
Causes and corrections for loss of power, vibration, and safety interlock failures.
