To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 917.275287 and is the answer not in the manual?
General| Engine Displacement | 190cc |
|---|---|
| Drive Type | Self-Propelled |
| Cutting Positions | 6 |
| Starter Type | Recoil |
| Cutting Height | 1.25 to 3.75 inches |
| Drive System | Rear Wheel Drive |
| Engine Type | Briggs & Stratton Intek V-Twin |
Highlights critical safety instructions before operating the equipment.
Details the warranty coverage and terms for the riding equipment.
Outlines the specific warranty terms for the included battery.
Covers essential safety practices for operating the tractor and navigating slopes.
Details safety considerations regarding children and performing service.
Provides further guidance on slope operation and customer duties.
Defines the hazard levels indicated by DANGER, WARNING, CAUTION, and HOT SURFACES alerts.
Illustrates and describes the location and function of all tractor controls and adjustments.
Instructions for engaging the parking brake and safely stopping the mower and engine.
Guidance on using throttle, choke, motion control, and adjusting mower height.
Procedures for engaging the mower and operating the tractor safely on slopes.
Instructions for checking oil, adding fuel, and starting the engine for the first time.
Detailed steps for starting the engine in both warm and cold weather conditions.
Procedures for warming up the transmission and purging air for optimal performance.
A table outlining required maintenance tasks based on operating hours or time intervals.
Details on engine oil type, viscosity, and the process for changing the engine oil.
Detailed steps for adjusting the throttle cable, choke control, and carburetor settings.
Diagnoses and corrections for issues like 'Will not start', 'Hard to start', and 'Engine clicks'.
Solutions for problems like loss of power, excessive vibration, and poor cut quality.
Diagnoses for issues like blades not rotating, poor grass discharge, and electrical faults.
Provides a method for sighting and measuring slopes to ensure safe operation.
