To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 917.276330 and is the answer not in the manual?
General| Engine Displacement | 190cc |
|---|---|
| Drive Type | Self-Propelled |
| Engine | Briggs & Stratton |
| Cutting Height Positions | 6 |
| Deck Material | Steel |
| Speed Settings | Variable |
| Oil Capacity | 20 oz |
| Starter Type | Recoil |
| Mulching Capability | Yes |
| Bagging Capability | Yes |
| Side Discharge Capability | Yes |
| Weight | 85 lbs |
| Cutting Width | 22 inches |
| Cutting Height | 1.5-4 inches |
| Drive System | Rear Wheel Drive |
Details the warranty coverage for the Craftsman riding tractor.
Specifies the warranty terms for the included battery.
Covers essential safety practices for tractor operation.
Provides guidelines for safe operation on slopes.
Addresses safety concerns regarding children and towing.
Details safe practices for handling gasoline.
Outlines safety precautions for maintenance and service.
Lists technical details and performance data for the tractor.
Defines owner's duties for proper tractor maintenance and use.
Information on extended service plans and warranty options.
Lists tools needed for tractor assembly and unpacking.
Guides on attaching steering wheel, seat, and removing from skid.
Instructions for attaching the mower deck to the tractor.
Final checks to ensure safe and proper operation.
Identifies and explains the function of tractor controls.
Step-by-step guide for starting and stopping the engine.
Instructions on moving forward, backward, and using the brake.
Guidance on operating the mower deck and managing cutting height.
Explanation of the ROS and its safe usage.
Advice on slope operation, transportation, and mowing techniques.
Recommended service intervals for tractor components.
Key advice for maintaining tractor longevity and warranty.
Essential checks to perform before each use.
Lubrication points and V-belt inspection.
Procedures for maintaining tires, brakes, and blades.
Cleaning battery terminals and engine oil service.
Instructions for cleaning and replacing air and fuel filters.
Steps to detach and reattach the mower deck.
Procedure for adjusting mower deck side-to-side and front-to-back.
Guide for replacing mower and motion drive belts.
Procedures for adjusting the attachment clutch and service brake.
Instructions for wheel removal and battery replacement.
Adjusting engine control cables and carburetor.
Procedures for preparing the tractor for storage.
Diagnosing and resolving problems with engine startup.
Addressing power loss, vibration, and poor cut quality.
Troubleshooting headlights, battery charging, and wiring.
Wiring diagram and list of electrical component part numbers.
Diagrams and part numbers for chassis, ground drive, and transaxle.
Exploded views and parts lists for steering, seat, and lift mechanisms.
Diagrams and part numbers for the mower deck and engine assembly.
How to use the provided guide to assess slope angles.
