To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 917.276911 and is the answer not in the manual?
General| Model Number | 917.276911 |
|---|---|
| Category | Lawn Mower |
| Engine | Briggs & Stratton |
| Cutting Positions | 6 |
| Mulching Capability | Yes |
| Bagging Capability | Yes |
| Side Discharge Capability | Yes |
| Cutting Height | 1.25 to 3.75 inches |
| Drive System | Rear-wheel drive |
Covers defects in material or workmanship for the tractor within two years from the date of purchase.
Covers defects in material or workmanship for the battery within ninety days from the date of purchase.
Provides essential instructions for safe operation of the tractor, covering general usage guidelines.
Details critical safety precautions and procedures for operating the tractor on slopes.
Highlights safety risks associated with children around the operating tractor and necessary precautions.
Outlines safety guidelines and recommendations for towing attachments with the tractor.
Provides essential safety information and precautions for handling gasoline, including fire and explosion risks.
Familiarizes the user with the tractor's controls and adjustments through diagrams and labels.
Provides instructions on how to operate various functions of the tractor.
Detailed steps on how to properly set the parking brake on the tractor.
Instructions for safely stopping the mower blades, including disengaging the clutch.
Procedures for stopping the tractor's ground movement, including pedal and gearshift operations.
Steps for safely shutting down the tractor's engine, including throttle and ignition key usage.
Guidance on using the throttle control for optimal engine speed and mower performance.
Instructions on when and how to use the choke control for starting a cold engine.
Explains how to control the tractor's movement using the gearshift lever.
Steps for adjusting the mower deck to the desired cutting height for lawn maintenance.
Instructions on adjusting mower gauge wheels for proper deck leveling and scalping prevention.
Steps for operating the mower attachment, including engaging and disengaging blades.
Explanation and operation of the Reverse Operation System (ROS) for mowing in reverse.
Safety guidelines and procedures for operating the tractor on slopes, including angle limitations.
Procedure for checking the engine oil level and adding oil if necessary.
A schedule outlining routine maintenance tasks for the tractor and engine based on usage hours and seasons.
Diagnoses common causes and provides corrections for when the tractor engine fails to start.
Identifies reasons for difficult engine starting and offers solutions for improvement.
Troubleshooting steps for when the engine does not crank or turn over when the ignition is activated.
Addresses issues where the engine makes clicking sounds but fails to start, often battery or starter related.
Diagnoses causes for reduced engine power and suggests corrective actions.
Troubleshooting steps for instances where the engine shuts off when shifting into reverse.
Addresses safety system failures where the engine does not shut off when the operator leaves the seat.
Troubleshooting guide for uneven or poor quality lawn cutting performance.
Diagnoses reasons why the mower blades are not spinning and provides corrective actions.
Troubleshooting steps for issues related to inadequate grass clippings discharge during mowing.
