Do you have a question about the Craftsman 917.370600 and is the answer not in the manual?
Model Number | 917.370600 |
---|---|
Category | Lawn Mower |
Engine | Briggs & Stratton |
Fuel Type | Gasoline |
Engine Displacement | 190cc |
Cutting Width | 22 inches |
Cutting Height Positions | 6 |
Fuel Tank Capacity | 1.6 quarts |
Wheel Size (Front) | 8 inches |
Wheel Size (Rear) | 11 inches |
Safety guidelines for mowing on inclines.
Proper procedures for storing and using gasoline.
Steps for unpacking, unfolding handle, and attaching grass catcher.
Familiarization with mower controls, adjustments, and symbols.
Essential checks, adding oil/gas, starting, and stopping the engine.
Best practices and tips for effective mulching of grass clippings.
A table outlining required maintenance tasks and intervals.
Important advice for maintaining the mower and warranty.
Guidance on keeping the unit properly lubricated.
A visual guide to lubrication points on the mower.
Maintenance and care for the mower's tires.
How to check and clean the drive wheels for proper movement.
Important considerations for mower blade maintenance and replacement.
Step-by-step guide for safely detaching the mower blade.
Instructions for securely installing a new or sharpened mower blade.
Guidelines and precautions for sharpening the mower blade.
Using the correct oil for the engine and checking levels.
Detailed steps for draining and refilling the engine oil.
Importance and replacement schedule for the air filter.
Procedures for cleaning or replacing the air filter element.
Inspection and replacement advice for the muffler.
When to replace the spark plug for optimal engine performance.
How to use the hose fitting for easy cleaning of the mower underside.
Regular cleaning of the drive cover underside.
Adjusting the wheel height for desired cutting levels.
Function and replacement of the rear deflector.
Steps for removing the drive belt from the mower.
Instructions for installing a new drive belt.
How to adjust the handle height for operator comfort.
Preparing the mower for long-term storage.
Folding the mower handle for storage or transportation.