To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 917.370701 and is the answer not in the manual?
General| Model Number | 917.370701 |
|---|---|
| Category | Lawn Mower |
| Engine | Briggs & Stratton |
| Engine Type | 4-Cycle |
| Engine Displacement | 190 cc |
| Cutting Width | 21 inches |
| Cutting Height | 1.25 - 3.75 inches |
| Cutting Height Positions | 6 |
| Drive Type | Self-Propelled |
| Speed Settings | Variable |
| Wheel Size (Front) | 8 inches |
| Mulching Capability | Yes |
| Bagging Capability | Yes |
| Side Discharge Capability | Yes |
Details the 2-year warranty against defects in material or workmanship.
Highlights the machine's dangerous capabilities and general safety advice.
Instructions for safe operation, including hands/feet placement, clearing area, footwear.
Explains the location and function of key controls like the throttle and safety bars.
How to use the throttle control for starting, stopping, and speed adjustments.
Steps to start and stop the mower blade safely.
Steps for starting a cold or warm engine, including choke operation.
Guidance on blade maintenance, removal, replacement, and sharpening.
Steps for cleaning, lubricating, and checking the mower before storage.
How to prepare the fuel system for storage, including emptying or using stabilizer.
Lists causes and corrections for the engine not starting.
Addresses loss of power, poor cut quality, and excessive vibration.
Troubleshooting for hard-to-push mower, engagement failures, and engine stalling.
Details the 2-year warranty against material and workmanship defects.
Emphasizes machine hazards and the importance of following safety instructions.
Instructions for safe operation, handling, and basic mower use.
Guide to identifying and understanding mower controls and safety symbols.
Advises on keeping children away from the mowing area and staying alert.
Instructions for safe handling of gasoline, including ignition sources and containers.
How to use the motor controls for starting, stopping, and speed.
Instructions for engaging the blade and adjusting its control system.
Procedures for checking and adding engine oil.
Instructions for filling the fuel tank with gasoline.
Steps for starting a cold or warm engine and safely stopping it.
Table detailing maintenance checks and their frequency.
Details on oil type, checking level, and servicing the air filter.
