Do you have a question about the Craftsman 917.374550 and is the answer not in the manual?
Engine Type | 4-cycle |
---|---|
Engine Brand | Briggs & Stratton |
Engine | Briggs & Stratton 675 Series |
Displacement | 190cc |
Cutting Positions | 6 |
Drive Type | Self-propelled |
Speed | Variable |
Oil Capacity | 20 oz |
Cutting Width | 21 inches |
Cutting Height Adjustment | Dual Lever |
Cutting Height | 1.25 to 3.75 inches |
Fuel Capacity | 1.6 quarts |
Warranty | 2 years limited |
Covers defects in material and workmanship, offering free repair or replacement.
Precautions for mowing on slopes to prevent accidents and injuries.
Ensuring child safety around the lawn mower during operation.
Guidelines for safely handling flammable gasoline to prevent fire hazards.
Steps for unfolding and preparing the mower's handle for use.
Procedure for safely removing the lawn mower from its shipping carton.
Familiarization with the location and function of mower controls and symbols.
Procedure for adding the correct type and amount of engine oil.
Instructions for filling the fuel tank with the correct type of gasoline.
How to safely stop the engine using the operator control bar.
Procedures for starting the engine using the key or rope starter.
General advice on maintaining the mower for warranty and performance.
Essential checks to perform before each operation of the mower.
Information on lubricating the mower's components.
A visual chart indicating lubrication points on the mower.
Instructions for maintaining the mower's tires.
Checking and cleaning the drive wheels for proper operation.
Care, removal, replacement, and sharpening of the mower blade.
Procedure for adding the correct type and amount of engine oil.
Detailed steps for draining and refilling the engine oil.
Procedure for cleaning the air filter cartridge.
Inspection of muffler and replacement of spark plug.
How to use the built-in fitting for easy cleaning of the mower underside.
Procedure for cleaning the underside of the drive cover.
Adjustments related to cutting height, rear deflector, and handle.
Procedures for removing and replacing the mower's drive belt.
How to adjust the mower handle to three different height positions.
Information on engine speed settings and carburetor function.
Preparing the mower and folding the handle for storage.
Fuel system preparation for storage and engine oil change.
Lubricating cylinder, maintaining battery, and other storage tips.