Do you have a question about the Craftsman 917.378771 and is the answer not in the manual?
Engine | Briggs & Stratton |
---|---|
Engine Type | 4-cycle |
Displacement | 190cc |
Cutting Width | 22 inches |
Cutting Height | 1.25 - 3.75 inches |
Cutting Height Positions | 6 |
Drive System | Front-wheel drive |
Speed Settings | Variable |
Fuel Tank Capacity | 1.6 quarts |
Oil Capacity | 20 oz |
Warranty | 2 years limited |
Read and follow all safety rules before operating this equipment.
Warranty coverage details for the Craftsman power mower.
Essential warnings to prevent serious injury or death.
Instructions for safe and proper use of the lawn mower.
Exercise extra caution when mowing on uneven terrain.
Procedures to keep children safe during operation.
Precautions for safe handling of gasoline and fuel.
Available accessories for lawn mower performance and upkeep.
Instructions for unfolding the handle and initial setup.
Guidance on attaching optional mower components.
Familiarize yourself with mower controls and symbols.
Compliance with Consumer Product Safety Commission standards.
Importance of wearing eye protection during operation.
How to adjust engine speed and engage drive control.
Steps to set the desired cutting height.
How to switch between mulching/bagging and empty catcher.
Procedures for adding engine oil and gasoline.
Tips for effective mowing and mulching.
Schedule for routine maintenance checks and services.
Overall advice for maintaining mower condition.
Details on lubrication points and types.
Information on tire care and blade condition.
Steps for removing, replacing, and sharpening the mower blade.
Maintenance for catcher, wheels, and gear case.
Engine oil type, level check, and change procedures.
Maintenance for air filter, muffler, and general cleaning.
Adjusting cutting height and rear deflector.
Adjusting drive belt, handle, and assembling grass catcher.
Engine settings and preparing the mower for storage.
Preparing fuel system and cylinder for long-term storage.
Causes and corrections for engine starting issues.
Diagnosing issues like loss of power and poor cut.
Addressing vibration, starter, and pushing difficulties.
Solutions for drive belt and speed issues.
General notes and advice regarding service.
Illustrated parts list for the gear case assembly.