Craftsman 917.378921 - Maintenance; Maintenance Schedule; General Recommendations; Lubrication Chart

MAINTENANCE BEFOREAFTEREVERY EVER EVERYBEFORE
EACH EACH 10 25 HOURS 100
SCNEI)ULE USE USE HOURSORSEASONHOURSSTORAGE
Check for Loose Fasleners
_ Clean / Inspect Grass C_tcher *
Check Tires
_ Check Drive Wheels ***
Clean Lawn Mower ....
_ Clean under Drive Cover ***
Check Drive Beg / Pulleys ***
_ Check / Sharpen / Replace Blade
R Lubrication
Clean and Recharge Baftery **
Check Engine Oil level
E Change Engit_e Oil
N Clean Air Figer
_ _nspect Matf_er
N Replace Spark Plug
lie Replace Air Figer Paper Cartridge
Empty fuel system or add Stabilizer
r, ., r,
v'
i/
* (if SOequipped)
** Electdc-Star t mowers
*** P0wer-Propeiled mowers
**** Use a scraper
to cIean under deck
t - Change more often if operating under a heavy load or in high outdoor temperatures
2 - Service more often if operating in dirty or dusty eondg_ons
3 - Replace b_ades more often when mowing in sandy soil
4 - Charge 48 hours at end of season¸
5 - And after each 5 hours of use
GENERAL RECOMMENDATIONS
The warranty on this lawn mower does not
cover items that have been subjected to
operator abuse or negligence. To receive
full value from the warranty, operator must
maintain unit as instructed in this manual.
Some adjustments will need to be made
periodically to properly maintain your unit.
At least once a season, check to see if
you should make any of the adjustments
described in the Service and Adjustments
section of this manual.
• At least once a year, replace the spark
plug, clean or replace air filter element
and check blade for wear. A new spark
plug and clean/new air filter element
assure proper air-fuel mixture and help
your engine run better and last longer.
• Follow the maintenance schedule in this
manual.
I
I
LUBRICATION CHART
Wheel
adjuster (on
each wheel)
ine oil
> Mulcher
door hinge
pin
(_ Rear door
hinge
_ Handle bracket mounting pins
BEFORE EACH USE
• Check engine oil level.
• Check for loose fasteners.
LUBRICATION
Keep unit well lubricated
(See "LUBRICATION CHART").
_ Spray lubricant
See ENGINE in Maintenance section.
IMPORTANT: Do not oil or grease plastic
wheel bearings. Viscous lubricants will
attract dust and dirtthat will shorten the life of
the self-lubricating bearings. If you feel they
must be lubricated, use only a dry, powdered
2graphite type lubricant sparingly.
1