To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 917.385130 and is the answer not in the manual?
General| Engine | Briggs & Stratton |
|---|---|
| Engine Displacement | 190cc |
| Cutting Height Positions | 6 |
| Speed Settings | Variable |
| Drive System | Rear Wheel Drive |
| Wheel Size (Front) | 8 inches |
| Wheel Size (Rear) | 11 inches |
Essential guidelines for safe and correct operation of the lawn mower.
Specific safety instructions for mowing on sloped terrain.
Crucial precautions to ensure children's safety around the mower.
Critical safety measures for handling and storing gasoline.
Key maintenance steps and safety checks for the lawn mower.
Instructions for safely removing the lawn mower from its packaging.
Steps for preparing the lawn mower for use, including handle setup.
Identification and function of key operating controls and symbols on the mower.
Instructions on how to adjust the cutting height of the mower.
Steps to change the mower from mulching to bagging or discharging.
Details on engine speed and the crucial safety control bar.
Procedure for safely starting and stopping the lawn mower engine.
Tips for effective mowing, including grass height and pattern.
Techniques for optimal mulching performance and grass health.
Scheduled checks and services for optimal mower performance.
Chart and instructions for proper lubrication of mower components.
Instructions for removing, sharpening, balancing, and replacing the mower blade.
Guidelines for selecting and checking engine oil based on temperature.
Step-by-step guide for draining and refilling the engine oil.
Procedures for maintaining the air filter and replacing the spark plug.
Guidance on inspecting the muffler and general mower cleaning.
Steps to adjust the handle for high or low mowing positions.
Information on engine speed limits and carburetor adjustments.
Instructions for preparing the mower and folding the handle for storage.
Procedures for fuel system preparation and engine oiling for storage.
Common causes and corrections for the engine failing to start.
Troubleshooting for loss of power, poor cut, and vibration.
Resolving issues with starter rope pull and grass catcher filling.
