To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 917.387613 and is the answer not in the manual?
General| Model Number | 917.387613 |
|---|---|
| Category | Lawn Mower |
| Type | Walk-Behind |
| Engine | Briggs & Stratton |
| Engine Type | 4-Cycle |
| Engine Displacement | 190cc |
| Cutting Width | 22 inches |
| Drive Type | Self-Propelled |
| Fuel Tank Capacity | 1.6 quarts |
| Cutting Height Positions | 6 |
| Cutting Height Range | 1.25 - 3.75 inches |
| Deck Material | Steel |
| Wheel Size (Front) | 8 inches |
| Wheel Size (Rear) | 11 inches |
| Starting System | Recoil |
| Mulching Capability | Yes |
| Side Discharge | Yes |
| Grass Collection | Bag Included |
Details the terms of the limited two-year warranty for the Craftsman power mower.
Highlights critical safety warnings and symbols for operating the mower.
Step-by-step instructions for safely removing the lawn mower from its shipping carton.
Instructions on unfolding and adjusting the mower handle for operation.
Information on converting the mower for bagging or discharging.
Identifies and explains the function of various controls and symbols on the mower.
Explains engine speed settings and the operator presence control bar.
Guides on how to adjust the mower's cutting height for different grass conditions.
Instructions on how to convert the mower for side discharge or bagging.
Step-by-step guide for checking and adding the correct engine oil.
Instructions and cautions for adding the correct type of gasoline.
Procedures for starting and stopping the lawn mower engine safely.
A schedule detailing required maintenance tasks based on usage hours or time.
Instructions and chart for lubricating mower components.
Details how to care for, remove, replace, and sharpen the mower blade.
Step-by-step instructions for draining and replacing the engine oil.
Detailed steps for replacing the air filter element.
Reference to the operation section for adjusting cutting height.
Instructions for changing the mower's handle position for comfort.
Information on factory-set engine speed and carburetor limitations.
Steps for cleaning and preparing the mower for storage.
Procedures for preparing the fuel system for storage to prevent gumming.
Instructions for draining and replacing engine oil before storage.
