EasyManua.ls Logo

Craftsman 917.773706 User Manual

Craftsman 917.773706
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Owner's Manual
CRRFTSMRN°
WHEELED
WEEDTRIMMER
6.0 Horsepower
22 Inch Cut
Model No.
917.773706
Espahol, p. 17
_,CAUTION:
Read and follow all
Safety Rules and Instructions
before operating this equipment.
Sears, Roebuck and Co., Hoffman Estates, IL 60179
Visit our Craftsman website: www.sears.com/craftsman
U.S.A.
Question and Answer IconNeed help?

Do you have a question about the Craftsman 917.773706 and is the answer not in the manual?

Craftsman 917.773706 Specifications

General IconGeneral
BrandCraftsman
Model917.773706
CategoryTrimmer
LanguageEnglish

Summary

WARRANTY INFORMATION

LIMITED TWO YEAR WARRANTY

Details the terms of the two-year warranty for the Craftsman Weedtrimmer.

WARRANTY EXCLUSIONS

Lists items not covered by the warranty, such as expendable parts and operator abuse.

SAFETY RULES AND GUIDELINES

EYE PROTECTION REQUIREMENT

Emphasizes wearing safety glasses or eye shields to prevent eye injury from thrown objects.

GENERAL SAFETY PRECAUTIONS

Highlights the importance of caution and disconnecting the spark plug wire before adjustments.

GENERAL OPERATION PROCEDURES

PRE-OPERATION CHECKS AND ENVIRONMENT

Instructions on understanding the manual, checking controls, and preparing the operating area.

OPERATING TECHNIQUES AND HAZARDS

Advice on backward movement, using guards, accessories, and operating conditions.

SLOPE OPERATION GUIDANCE

SAFE SLOPE PRACTICES

Recommends trimming across slopes, exercising caution, and removing obstacles.

UNSAFE SLOPE PRACTICES

Advises against trimming near drop-offs, steep slopes, or on wet grass.

CHILD AND GENERAL SERVICE SAFETY

CHILD SAFETY PRECAUTIONS

Stresses keeping children away, being alert, and never allowing them to operate the machine.

FUEL HANDLING AND MAINTENANCE

Safety guidelines for handling gasoline and general maintenance advice.

PRODUCT SPECIFICATIONS AND ASSEMBLY

SPECIFICATION DETAILS

Lists gasoline capacity, oil type, spark plug, and trimmer line specifications.

INITIAL ASSEMBLY AND HANDLE SETUP

Instructions for unpacking, assembling, and unfolding the trimmer handle safely.

TRIMMER OPERATION OVERVIEW

KNOWING YOUR TRIMMER CONTROLS

Identifies trimmer controls, adjustments, and important safety symbols.

IMPORTANT STARTING NOTE

Crucial reminder that the trimmer is shipped without oil or gasoline.

TRIMMER OPERATION CONTROLS

ENGINE SPEED ADJUSTMENT

How engine speed is controlled by the throttle for different trimming tasks.

CUTTING HEIGHT ADJUSTMENT

Steps to adjust the trimmer head's cutting height to six positions.

TRIMMER HEAD ENGAGEMENT

How to operate the trimmer head using the drive control bar.

ADDITIONAL OPERATION PROCEDURES

ADDING ENGINE OIL

Instructions for adding oil to the engine before starting.

GASOLINE HANDLING AND STARTING

Guidelines for adding gasoline and starting the engine.

EFFECTIVE TRIMMING TIPS

Advice for best results, including throttle use, cleaning, and line management.

MAINTENANCE AND LUBRICATION

MAINTENANCE SCHEDULE OVERVIEW

A table outlining required maintenance tasks at specified intervals.

GENERAL MAINTENANCE RECOMMENDATIONS

Emphasizes maintaining the unit for warranty and proper operation.

LUBRICATION GUIDELINES

Guidance on lubricating various parts, with specific notes on plastic bearings.

TRIMMER MAINTENANCE PROCEDURES

TRIMMER LINE REPLACEMENT

Instructions for cutting and replacing trimmer line for optimal balance.

GENERAL TRIMMER CARE

Advice on tire care and general maintenance of the trimmer unit.

ENGINE AND AIR FILTER MAINTENANCE

ENGINE OIL MANAGEMENT

Guidance on oil selection, checking, and changing for engine longevity.

AIR FILTER SERVICE

Instructions for cleaning or replacing the air filter for engine performance.

MUFFLER AND SPARK PLUG CARE

Inspection of muffler and replacement of spark plug for engine health.

SERVICE AND ADJUSTMENT PROCEDURES

HANDLE AND HEIGHT ADJUSTMENTS

How to adjust the trimmer handle and cutting height for comfort and performance.

DRIVE BELT REPLACEMENT

Step-by-step guide to removing and replacing the trimmer head drive belt.

ENGINE PERFORMANCE AND CARBURETOR

ENGINE SPEED SETTINGS

Information on factory-set engine speed and when to seek service.

CARBURETOR FUNCTIONALITY

Notes on the non-adjustable carburetor and when to seek service.

STORAGE PREPARATION AND PROCEDURES

TRIMMER UNIT STORAGE

Instructions for cleaning the trimmer, folding the handle, and protecting the unit.

ENGINE STORAGE PREPARATION

Steps to prepare the fuel system and engine oil for long-term storage.

TROUBLESHOOTING COMMON PROBLEMS

ENGINE STARTING AND POWER ISSUES

Diagnosing and correcting problems with engine starting and loss of power.

OPERATIONAL AND VIBRATION PROBLEMS

Addressing excessive vibration, hard starting, and poor trimming performance.

TRIMMER LINE ISSUES

Solutions for trimmer line not retaining properly or being too short.

SLOPE OPERATION GUIDE

SLOPE LIMITATIONS AND SAFETY

Guidance on maximum slope angles and general safety for slope trimming.

SAFE SLOPE TRIMMING TECHNIQUES

Techniques for operating on slopes, emphasizing diagonal cutting and caution.

REPAIR PARTS LISTING

TRIMMER MODEL AND PART IDENTIFICATION

Identifies the trimmer model and lists parts with key and part numbers.

ACCESSORIES AND CONSUMABLES

Lists available accessories and consumables like trimmer line.

CHASSIS AND DRIVE SYSTEM PARTS

CHASSIS ASSEMBLY COMPONENTS

Parts specific to the main chassis structure and mounting points.

DRIVE BELT AND PULLEY PARTS

Components related to the belt drive system, including pulleys and bearings.

ENGINE REPAIR PARTS (CARBURETOR & GASKETS)

CARBURETOR OVERHAUL AND GASKET KITS

Lists parts for carburetor repair and gasket sets for the engine.

ENGINE CORE COMPONENTS

CYLINDER HEAD AND CRANKSHAFT PARTS

Components for the engine's cylinder, head, crankshaft, and flywheel.

PISTON CONNECTING ROD AND VALVES

Parts for the piston assembly, connecting rod, and valve train.

ENGINE ACCESSORIES AND SMALL PARTS

FUEL AIR AND IGNITION PARTS

Parts for the fuel system, air cleaner, muffler, and spark plug.

GOVERNOR AND CONTROL SYSTEM PARTS

Components related to the engine's governor and control mechanisms.

SEARS CUSTOMER SUPPORT

HOME AND CARRY-IN REPAIR SERVICES

Contact information for various repair services offered by Sears.

PRODUCT PROTECTION AGREEMENTS

Information on purchasing extended warranties and maintenance plans.

Related product manuals