To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 917.773704 and is the answer not in the manual?
General| Cutting Width | 17 in. |
|---|---|
| Engine Type | 2-cycle |
| Engine Displacement | 25cc |
| Cutting Swath | 17 in. |
| Shaft Type | Straight |
| Starter Type | Pull start |
Important safety precautions and guidelines for operating the trimmer, including eye protection and avoiding hazards.
Guidance on operating the engine, throttle control, and starter handle for starting and running the trimmer.
Instructions for checking and filling the engine oil level before starting the trimmer.
Steps for starting a cold engine using the primer and throttle, and how to stop the trimmer.
A schedule outlining regular checks and servicing tasks for the trimmer, categorized by frequency.
Specific maintenance tasks for the trimmer's tires, trimmer line, cutting length, and replacement procedures.
Procedures for engine lubrication, oil selection, and changing the engine oil.
Information on factory-set engine speed and carburetor settings, and when to seek professional adjustment.
Preparing the fuel system for storage using stabilizer or draining to prevent fuel degradation.
A guide to identify common issues with the trimmer, including causes and suggested corrections.
