EasyManua.ls Logo

Craftsman 944.360440 User Manual

Craftsman 944.360440
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Owner's Manual
£RAFTSMAN"
6.0, HORSEPOWER
MULTI-CUT
ROTARY LAWN MOWER
Model No.
944.360440
Safety
Assembly
Operation
Maintenance
Repair Parts
CAUTION:
Read and follow .all
Safety Rules and Instructions
before operating this equipment
Sears Canada, Inc., Toronto, Ontario M5B 2B8
Question and Answer IconNeed help?

Do you have a question about the Craftsman 944.360440 and is the answer not in the manual?

Craftsman 944.360440 Specifications

General IconGeneral
Engine BrandBriggs & Stratton
Engine Type4-Cycle
Engine Displacement140cc
Drive TypeSelf-Propelled
Speed ControlVariable Speed
Mulching CapabilityYes
Bagging CapabilityYes
Side Discharge CapabilityYes
Warranty2-year limited
Cutting Width21 inches
Cutting Height1.25 to 3.75 inches
Drive SystemRear Wheel Drive

Summary

WARRANTY

WARRANTY DETAILS

Limited two-year warranty on Craftsman power mower, including exclusions and service.

SAFETY RULES

OPERATOR TRAINING

Learn proper mower operation and safety, including quick stopping procedures.

MOWING AREA PREPARATION

Clear the mowing area of foreign objects and wear safety glasses for protection.

OPERATION GUIDELINES

DRESS AND OPERATION

Proper attire, fuel safety, wheel adjustments, and mowing in daylight.

OPERATIONAL SAFETY

Maintain focus, avoid wet grass, keep clear of moving parts, and avoid discharging at people.

MAINTENANCE AND STORAGE PRECAUTIONS

Ensure tightness, check safety devices, keep engine clean, and follow storage preparation.

ASSEMBLY INSTRUCTIONS

UNPACKING AND INSPECTION

Remove mower from carton, check for all parts and damage.

HANDLE ASSEMBLY AND ADJUSTMENT

Unfold and adjust mower handles for optimal comfort and control.

GRASS CATCHER ASSEMBLY

Assemble the grass catcher bag and attach it securely to the mower.

CONVERTING MOWER FUNCTIONS

Instructions for converting the mower to mulching, bagging, or side discharge modes.

LAWN MOWER OPERATION AND CONTROLS

KNOW YOUR LAWN MOWER

Identify key components and controls for familiarization with mower operation.

SAFETY REQUIREMENTS COMPLIANCE

Confirmation that the mower meets Consumer Product Safety Commission standards.

MOWER OPERATION AND CONVERSION

ENGINE SPEED AND ZONE CONTROL

Understand factory-set engine speed and the mandatory engine control system.

ADJUSTING CUTTING HEIGHT

Steps to adjust the mower's cutting height using the wheel adjustment levers.

CONVERTING MOWER MODES

Convert between mulching, rear bagging, and side discharging modes.

BEFORE STARTING ENGINE

ENGINE OIL CHECK AND ADDITION

Procedure to check and add engine oil, noting capacity and change intervals.

FUELING THE MOWER

Guidelines for filling the fuel tank with the correct type and amount of gasoline.

STARTING THE ENGINE

Steps for starting a cold or warm engine, including priming and control bar use.

MOWING TIPS AND TECHNIQUES

GENERAL MOWING ADVICE

Tips for cutting tall grass, heavy cutting, and engine maintenance.

MULCHING MOWING TECHNIQUES

Best practices for mulching, including blade speed, cutting height, and pattern.

MAINTENANCE SCHEDULE AND PROCEDURES

REGULAR MAINTENANCE SCHEDULE

Detailed schedule for service and checks based on usage intervals.

GENERAL MAINTENANCE RECOMMENDATIONS

Advice on warranty, periodic adjustments, and annual servicing.

LUBRICATION CHART AND GUIDELINES

Diagrams and notes for lubricating various lawn mower parts.

PRODUCT SPECIFICATIONS AND CARE

TECHNICAL SPECIFICATIONS

Key technical details: capacity, spark plug, torque, and clearances.

LAWN MOWER CARE AND MAINTENANCE

Safety rules for tire care and cleaning the mower housing.

BLADE CARE AND REPLACEMENT

Instructions for removing, replacing, and sharpening the mower blade.

ENGINE MAINTENANCE AND CARE

BLADE SHARPENING AND BALANCING

Guidance on safely sharpening and balancing the mower blade.

GRASS CATCHER MAINTENANCE

How to clean and check the grass catcher for wear and damage.

ENGINE OIL LUBRICATION

Selecting correct oil, checking levels, and changing engine oil.

AIR FILTER MAINTENANCE

Instructions for cleaning or replacing the air filter for optimal engine performance.

SERVICE AND ADJUSTMENTS

SPARK PLUG REPLACEMENT

How to change and gap the spark plug for easier starting and better engine run.

MOWER CLEANING PROCEDURES

Procedures for cleaning the mower housing and exterior surfaces after use.

CUTTING HEIGHT AND HANDLE ADJUSTMENTS

Adjusting cutting height and handle positions for optimal use.

REAR DEFLECTOR INFORMATION

Details on the rear deflector and its replacement if damaged.

STORAGE PREPARATION

LAWN MOWER STORAGE PREPARATION

Steps to clean, lubricate, and secure the mower before storing.

FOLDING THE HANDLE FOR STORAGE

Instructions on how to fold the mower handle for storage or transportation.

ENGINE FUEL SYSTEM STORAGE PRECAUTIONS

Preventing fuel system issues during storage, especially with alcohol fuels.

ENGINE STORAGE PROCEDURES

FUEL SYSTEM STORAGE STEPS

Draining fuel, using stabilizer, and proper fuel storage practices.

ENGINE OIL STORAGE PROCEDURE

Procedures for draining and replacing engine oil for storage.

CYLINDER STORAGE PREPARATION

Adding oil to the cylinder and replacing the spark plug for storage.

TROUBLESHOOTING CHART

ENGINE STARTING PROBLEMS

Causes and corrections for when the engine does not start.

POWER LOSS AND POOR CUT

Troubleshooting for loss of power and uneven or poor grass cutting.

TROUBLESHOOTING COMMON ISSUES

VIBRATION AND STARTER PROBLEMS

Causes and corrections for excessive vibration and hard-to-pull starter rope.

GRASS CATCHER AND PUSHING ISSUES

Troubleshooting for grass catcher filling problems and difficulty pushing the mower.

REPAIR PARTS DIAGRAM

PARTS LAYOUT AND IDENTIFICATION

Exploded view of mower components with key numbers for part identification.

REPAIR PARTS LIST

PARTS DESCRIPTION AND NUMBERS

Comprehensive list of parts with key numbers, part numbers, and descriptions.

ENGINE BREAKDOWN DIAGRAM

ENGINE COMPONENTS OVERVIEW

Exploded view of Briggs & Stratton engine components for identification.

ENGINE INTERNAL PARTS BREAKDOWN

ENGINE INTERNAL COMPONENTS DIAGRAM

Exploded view of internal engine parts: pistons, crankshaft, valves.

ENGINE GASKETS AND KITS

GASKET SETS AND CARBURETOR KITS

Illustrations and part numbers for engine gasket sets and carburetor kits.

ENGINE EXTERNAL COMPONENTS

AIR CLEANER AND STARTER ASSEMBLY

Diagrams of air cleaner, starter components, and related parts.

ENGINE PARTS LIST (1-634)

ENGINE PART NUMBERS (KEY 1-634)

Detailed list of engine parts with key numbers, part numbers, and descriptions.

ENGINE PARTS LIST (635-2500)

ENGINE PART NUMBERS (KEY 635-2500)

Continuation of engine parts list: key numbers, part numbers, and descriptions.

PARTS ORDERING INFORMATION

CONTACT NUMBERS FOR PARTS AND SERVICE

Phone numbers for ordering parts and contacting Sears for service.

Related product manuals