To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 944.609940 and is the answer not in the manual?
General| Engine | Briggs & Stratton |
|---|---|
| Engine Type | 4-Cycle |
| Cutting Positions | 6 |
| Cutting Width | 22 inches |
| Discharge Options | Side, Mulch, Rear |
| Speed Settings | Variable |
| Warranty | 2-year limited |
Instructions for ordering replacement parts and accessing service.
Identifies the specific model number of the tractor.
Details the Craftsman tractor's key specifications and model.
Guidelines for safe and proper use of the cutting machine.
Precautions and procedures for operating on inclined surfaces.
Safety measures to prevent child-related accidents.
Safety guidelines for handling fuel and performing maintenance.
Technical details and requirements for the tractor.
Information regarding available service plans for the product.
List and visual guide to hardware included in the tractor's packaging.
List of necessary tools for assembling the tractor.
Instructions for safely unpacking and initially setting up the tractor.
Explanation of symbols that may appear on the tractor or in its literature.
Identification and function of various controls and adjustments on the tractor.
Requirement and importance of wearing protective eyewear.
Procedures for engaging the parking brake and safely stopping the tractor.
Safety guidelines and procedures for operating the tractor on slopes.
Steps for safely moving the tractor on a trailer or truck.
Pre-operation checks for the engine, including oil level and fuel.
Instructions for safely fueling the tractor's gasoline tank.
Procedures for starting the tractor's engine in various weather conditions.
Procedure to remove air from the hydraulic transmission for proper operation.
Advice for achieving optimal mowing performance and results.
Recommended service intervals for tractor and engine components.
Advice on maintaining the tractor for warranty and performance.
Diagram indicating lubrication points and types of lubricants.
Checks and adjustments for the tractor's braking system.
Maintaining proper tire pressure and condition.
Verification of safety interlock functions.
Instructions for maintaining mower blades, including sharpening.
Procedures for checking and maintaining the tractor's battery.
Steps to clean battery terminals for optimal performance.
Importance of keeping transaxle clean and inspecting drive belts.
Recommended oil types, change intervals, and oil change procedure.
Procedures for cleaning and servicing the engine's air filter system.
Inspection and replacement of muffler and spark plugs.
Guidelines for replacing the fuel filter.
General cleaning instructions for the tractor's exterior and components.
Essential safety precautions before any maintenance.
Step-by-step instructions for detaching and attaching the mower deck.
Procedures to ensure the mower deck is properly aligned for level cutting.
How to adjust the mower deck for proper front-to-back pitch.
Procedure for taking off the mower drive belt.
Procedure for installing a new mower drive belt.
Steps to adjust the electric clutch for proper engagement.
Procedure for adjusting the tractor's braking system.
Steps to replace the belt that drives the tractor's motion.
Procedure to adjust the lever that controls speed and direction.
How to correct misaligned front wheels.
Procedure for adjusting the front wheel alignment.
Procedure to adjust front wheel toe-in for proper steering.
Instructions for removing front and rear wheels for service.
Guidance on using jumper cables for starting.
Procedure for replacing a burnt-out headlight bulb.
Checking wiring for potential issues affecting operation.
Steps to detach the tractor's hood and grill.
Procedures for adjusting throttle and choke control cables.
Instructions for preparing the tractor for long-term storage.
Guidelines for storing the tractor battery to maintain its charge.
Steps to prepare the fuel system for storage to prevent issues.
Procedures for preparing engine oil and cylinders for storage.
Identification of wiring harness connectors and routing.
List of components for the tractor's wheels and tires.
List of engine cylinder head and breather components.
List of engine crankcase components.
Detailed parts list for the engine's crankcase.
Components for the engine's blower housing and air intake system.
Parts for engine housing, baffles, air intake, and filtration.
Parts for engine controls and lubrication system.
List of parts not visually depicted in the diagrams.
Components for the engine's crankshaft and exhaust.
Detailed parts list for the engine's fuel system.
